Enclosures

P-H1434-26 Cover Plate - Hammond, Aluminum, 16" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-26 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$10.77
P-H1431-26X Cover Plate - Hammond, Steel, 16" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 16” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $11.66
Note: P-H1431-26BK3: Black is a special order item.
P-H1441-12X Chassis Box - Hammond, Steel, 7" x 5" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3
$12.56
P-H1441-20X Chassis Box - Hammond, Steel, 17" x 4" x 3"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Chassis box 17 inch wide by 4 inch deep by 3 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Starting at $29.61
Note: P-H1441-20BK3: Black is a special order item.
P-H1431-12X Cover Plate - Hammond, Steel, 7" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$4.48
P-H1451-22X Chassis Cage - Hammond, Steel, 12" x 8" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.

For satin black version, see P-H1451-22BK3
Starting at $49.21
P-H1590E Chassis Box - Hammond, Diecast Aluminum, 7.38" x 4.70" x 3.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$21.69
P-H1444-28 Chassis Box - Hammond, Aluminum, 16" x 8" x 3"
Hammond Chassis Box, Aluminum, 16 in. x 8 in. x 3 in. Spot-welded heavy duty construction, natural finish. See P-H1434-26 for cover.
$31.87
P-H1590TRPCX Chassis Box - Hammond, Diecast, 3.74" x 5.95", Trapezoid
Colors Available:
Uniquely shaped trapezoid Hammond enclosure. Screws included.
$13.83
P-H1590B2 Chassis Box - Hammond, Diecast Aluminum, 4.4" x 2.3" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$7.73
P-H1590G2 Chassis Box - Hammond, Diecast Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$7.95
On Backorder
P-H1441-24X Chassis Box - Hammond, Steel, 12" x 8" x 3"
Colors Available:
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
  • Spot welded heavy duty construction chassis.
  • 0.036"" thick.
  • Dimensions shown are exterior dimensions.
  • Does not include cover. See P-H1431-22 Key
Starting at $29.75
Note: P-H1441-24BK3: Black is a special order item.
P-H1451-16 Chassis Cage - Hammond, Steel, 10" x 6" x 5.2"
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.
$43.13
P-H1590DD Chassis Box - Hammond, Diecast Aluminum, 7.38" x 4.70" x 1.30"
Hammond Mfg. Diecast Aluminum Chassis Box – 7.4” x 4.7” x 1.3”. Made in Taiwan. Key Features: • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Quantity six (6) 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
$16.69
P-H1434-137 Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$8.08
P-H1441-28X Chassis Box - Hammond, Steel, 16" x 8" x 3"
Colors Available:
Hammond Chassis Box, steel, 16 in. x 8 in. x 3 in.
  • Spot welded heavy duty construction chassis.
  • 0.036" thick.
  • Dimensions shown are exterior dimensions.
  • Does not include cover. See P-H1431-26
Starting at $35.00
P-H1431-18X Cover Plate - Hammond, Steel, 13.5" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).
$8.08
P-H1431-20X Cover Plate - Hammond, Steel, 17" x 4", 20 Gauge
Colors Available:
Special Order Item
20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
$8.09
Note: special order items require additional lead time. See our page on special order items.
P-H1434-29 Cover Plate - Hammond, Aluminum, 12" x 10", 20 Gauge
20 gauge bottom chassis plate for P-H1444-29 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$11.23
P-H1590X Chassis Box - Hammond, Diecast Aluminum, 5.7" x 4.8" x 2.1"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.34
P-H1441-29X Chassis Box - Hammond, Steel, 12" x 10" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036 thick. Does not include cover. please refer to P-H1431-29
Starting at $28.73
P-HCH07 Chassis - Marshall Style 18 Watt TMB
Marshall™ style 18 Watt TMB chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$88.47
P-H1431-8X Cover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$4.03
P-H1590F Chassis Box - Hammond, Diecast Aluminum, 7.38" x 7.38" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$27.31
Don't see what you're looking for? Send us your product suggestions!