Enclosures / Chassis
Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$9.10
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
Chassis Box - 1590G2, Diecast, 3.94" x 1.97" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$9.65
Cover Plate - Hammond, Aluminum, 13.5" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-18 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$9.70
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Predrilled
Predrilled 1590BB enclosures. Measures 4.71" x 3.70" x 1.18" deep. These enclosures come drilled with holes for pots, footswitch and top mounted jacks.
Colors Available:
- Standard size footswitch mounting hole fits 12mm or 15/32” bushings
- ⅜” mounting holes for top mounted jacks
- Enclosed or low profile ¼” jacks recommended
- Top mounted DC jack mounting hole fits common switched jacks such as S-H750-X and P-JBLB-IN-S
- 8mm potentiometer mounting holes fit a variety of different pot sizes but 16mm pots are recommended.
Starting at $9.95
Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
Colors Available:
- Slightly beveled top and rounded corners for high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Recessed bottom lid
Starting at $10.45
Cover Plate - Hammond, Aluminum, 10" x 6", 20 Gauge
20 gauge bottom chassis plate for P-H1444-16 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$10.50
Cover Plate - Hammond, Aluminum, 10" x 8"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$10.55
Out of Stock
Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$10.80
Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$10.90
Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
Colors Available:
- Beveled top and rounded corners for high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Add 0.16" to enclosure depth for lid.
Starting at $10.95
Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
Colors Available:
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $10.95
Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
Cover Plate - Hammond, Aluminum, 17" x 4"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$11.70
Out of Stock
Chassis Box - Hammond, Aluminum, 4.5" x 3.5" x 1"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$11.70
Out of Stock
Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Aluminum alloy to BS1490, LM2M - supplied in natural finish.
- Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
- Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
- Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
- Countersunk lid holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$11.95
Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$11.95
Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$12.50
Chassis Box - Hammond, 27134PSLA, Eddystone 1590B, Diecast, 4.4” x 2.4” x 1.2”
Eddystone 27134PSLA enclosure with similar dimensions to the Hammond 1590B enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590B style builds.
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Aluminum alloy to BS1490, LM2M - supplied in natural finish.
- Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
- Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
- Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
- Countersunk lid holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$12.95
Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $12.95
Cover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:
Special Order Item
Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D
Starting at $13.33
Chassis Box - Hammond, Aluminum, 4" x 4" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$13.53
Out of Stock
Cover Plate - Hammond, Aluminum, 12" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-22 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$13.55