1. Home
  2. Products
  3. Enclosures / Chassis

Enclosures / Chassis

products per page
P-H1434-127 Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge
Special Order Item
20 gauge bottom chassis plate for P-H1444-1273 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$8.78
Note: special order items require additional lead time. See our page on special order items.
P-H1590XXCE Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
P-H1591BTCL Chassis Box - Hammond, 1591BTCL, Crystal Clear, Polycarbonate, 4.40 x 2.40 x 1.10
1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.
  • Ideally suited for mounting printed circuit boards.
  • Perfect for applications where parts, sensors or indicators need to be visible.
  • Crystal Clear version is almost totally transparent.
  • Integral card guides accept 1.5 mm (0.062”) P.C. cards.
  • Lap joint construction provides protection against access of dust and splashing water.
  • Designed to meet IP54.
  • Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
  • Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.
$8.95
P-H1434-86 Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$9.10
P-H1431-20X Cover Plate - Hammond, Steel, 17" x 4", 20 Gauge
Colors Available:
20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Starting at $9.37
Note: P-H1431-20BK3: Black is a special order item.
P-H1590B2 Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
P-H1590G2 Chassis Box - 1590G2, Diecast, 3.94" x 1.97" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$9.65
P-H1431-16X Cover Plate - Hammond, Steel, 10" x 6", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$9.70
P-H1434-18 Cover Plate - Hammond, Aluminum, 13.5" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-18 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$9.70
P-H1590N1-GORVA-X Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
Colors Available:
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
  • Slightly beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $10.45
P-H1434-16 Cover Plate - Hammond, Aluminum, 10" x 6", 20 Gauge
20 gauge bottom chassis plate for P-H1444-16 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$10.50
P-H1434-108 Cover Plate - Hammond, Aluminum, 10" x 8"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$10.55
Out of Stock
P-H1590B3 Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$10.80
P-H1431-18X Cover Plate - Hammond, Steel, 13.5" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).
$10.90
P-H1434-137 Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$10.90
P-H1590BBX Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
P-H1590BB-GORVA-X Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
Colors Available:
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.
Starting at $10.95
P-H1591CTCL Chassis Box - Hammond, 1591CTCL, Crystal Clear, Polycarbonate, 4.70 x 2.60 x 1.40"
1591T Series enclosure made of clear polycarbonate. The 1591C is a similar size to the 1590N1 / 125B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.
  • Ideally suited for mounting printed circuit boards.
  • Perfect for applications where parts, sensors or indicators need to be visible.
  • Crystal Clear version is almost totally transparent.
  • Integral card guides accept 1.5 mm (0.062”) P.C. cards.
  • Lap joint construction provides protection against access of dust and splashing water.
  • Designed to meet IP54.
  • Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
  • Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.
$10.95
P-H1590TRPB-X Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Colors Available:
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $10.95
P-H1032L Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
P-H1444-45351 Chassis Box - Hammond, Aluminum, 4.5" x 3.5" x 1"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$11.70
Out of Stock
P-H1434-20 Cover Plate - Hammond, Aluminum, 17" x 4"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$11.70
Out of Stock
P-H-M45-GORVA-X Chassis Box - GØRVA Design, M45, Diecast, 3.94" x 1.77" x 1.38"
Colors Available:
The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:
  • Slightly beveled top and rounded corners for a high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for a more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $11.95
P-H1590A-EDDY Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$11.95
Don't see what you're looking for? Send us your product suggestions!