Enclosures / Chassis
Hammond
Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54", Hammered Blue
Limited Run!
Short trapezoid shaped Hammond enclosure in a hammered blue powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:- Hammered blue powdercoat
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$24.95
Out of Stock
Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$35.10
Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:
Features:
- Rugged, diecast aluminum alloy (tough - yet easy to machine)
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
- Designed to meet IP54
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting
$13.95
Chassis Box - Hammond, Aluminum, 17" x 8" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$36.95
Chassis Box - Hammond, Aluminum, 16" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$37.55
Chassis Box - Hammond, Aluminum, 13.5" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$22.95
Cover Plate - Hammond, Aluminum, 7" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-12 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$6.05
Chassis Box - Hammond, Steel, 12" x 10" x 2"
Spot welded heavy duty construction chassis. 0.036 thick. Does not include cover. please refer to P-H1431-29
Colors Available:
Starting at $37.48
Cover Plate - Hammond, Aluminum, 16" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-26 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$14.55
Chassis Box - Hammond, Steel, 16" x 8" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26
Colors Available:
$40.00
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”, Hammered Bronze
Limited Run!
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures finished in a hammered bronze powdercoat. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$26.95
Out of Stock
Chassis Box - Hammond, 1591CTCL, Crystal Clear, Polycarbonate, 4.70 x 2.60 x 1.40"
1591T Series enclosure made of clear polycarbonate. The 1591C is a similar size to the 1590N1 / 125B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.
- Ideally suited for mounting printed circuit boards.
- Perfect for applications where parts, sensors or indicators need to be visible.
- Crystal Clear version is almost totally transparent.
- Integral card guides accept 1.5 mm (0.062”) P.C. cards.
- Lap joint construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
- Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.
$10.95
Cover Plate - Hammond, Aluminum, 17" x 10", 20 Gauge
20 gauge bottom chassis plate Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$15.30
Chassis Box - Hammond, 1590D, Diecast, 7.39" x 4.71" x 2.05"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$23.45
Cover Plate - Hammond, Aluminum, 12" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-22 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$13.55
Chassis Box - Hammond, Aluminum, 6" x 4" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
Does not include cover. See P-H1434-8
- Spot-welded heavy duty construction
- Natural finish
Does not include cover. See P-H1434-8
$14.50
Chassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$7.55
Chassis Box - Hammond, Steel, 12" x 8" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3
Colors Available:
$38.80
Chassis Box - 1590G2, Diecast, 3.94" x 1.97" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$9.65
Chassis Box - Hammond, 1590X, Diecast, 5.72" x 4.77" x 2.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$17.40
Chassis Box - Hammond, 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Hammond Mfg. Diecast Aluminum Chassis Box – 7.4” x 4.7” x 1.3”. Made in Taiwan. Key Features: • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
$20.25
Chassis Box - Hammond, 1590TRPC, Trapezoid, 5.95 x 3.74 x 1.38"
Uniquely shaped trapezoid Hammond enclosure. Screws included.
Colors Available:
$16.75
Cover Plate - Hammond, Aluminum, 17" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1783
Features:
Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$13.95
Chassis Box - Hammond, Aluminum, 17" x 10" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$48.95