Enclosures

P-HCH02 Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$68.53
P-H1590BX Chassis Box - Hammond, Diecast Aluminum, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.07
P-H1590A Chassis Box - Hammond, Diecast Aluminum, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$6.22
P-HCH05 Chassis - Fender Style 5F1 Tweed Champ
Fender® style Tweed Champ™(5F1) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"
$56.07
P-H1590N1CE Chassis Box - Diecast Aluminum, 4.77" x 2.60" x 1.39"
Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.60" x 1.39".
$6.59
P-HCH03 Chassis - Fender Style 5F2 Tweed Princeton
Fender® style narrow panel Tweed Princeton™(5F2) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"
$62.30
P-H1590LBX Chassis Box - Hammond, Diecast Aluminum, 1.99" x 1.99" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $6.14
P-H1441-32X Chassis Box - Hammond, Steel, 17" x 10" x 3"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-32 or P-H1431-32BK3
$39.50
P-H1590BBCE-X Chassis Box - Diecast Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $8.95
P-H1441-16X Chassis Box - Hammond, Steel, 10" x 6" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See or P-H1431-16BK3
$17.05
P-H1590XX Chassis Box - Hammond, Diecast Aluminum, 5.3" x 4.4" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$13.02
P-H1590D Chassis Box - Hammond, Diecast Aluminum, 7.38" x 4.70" x 2.05"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$19.34
P-H1590CX Chassis Box - Hammond, Diecast Aluminum, 4.72" x 3.70" x 2.10"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $11.32
P-H1590BBX Chassis Box - Hammond, Diecast Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $9.42
P-H1431-30X Cover Plate - Hammond, Steel, 17" x 10", 20 Gauge
Colors Available:
20 gauge. Cover for chassis box 17 inch wide by 10 inch deep. Spot welded steel - heavy duty construction chassis. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
$14.35
P-H1590BBCE-PD Chassis Box - Diecast Aluminum, 4.67" x 3.68" x 1.18", pre-drilled
Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia.
$9.95
P-H1590DDCE Chassis Box - Diecast Aluminum, 7.38" x 4.70" x 1.30"
Diecast Aluminum Chassis Box, 7.4” x 4.7” x 1.3”. Six included machine screws secure lid.
$13.50
P-H1431-16X Cover Plate - Hammond, Steel, 10" x 6", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$7.18
P-H1431-22X Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$9.87
P-HCH04 Chassis - Fender Style 5F6A Tweed Bassman
Fender® style narrow panel Tweed Bassman™(5F6A) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''
$74.76
P-H1441-22X Chassis Box - Hammond, Steel, 12" x 8" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3
$28.73
P-H1590N1 Chassis Box - Hammond, Diecast Aluminum, 4.77" x 2.6" x 1.39"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
$10.81
P-H1441-18X Chassis Box - Hammond, Steel, 13.5" x 5" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-18 or P-H1431-18BK3
$17.95
P-H1590STPC Chassis Box - Hammond, Diecast, 5.23" x 5.23" x 1.38", Octagon
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23"x5.23"x1.38"
$11.63
Don't see what you're looking for? Send us your product suggestions!