Enclosures / Chassis

P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Starting at $1.35
package of 4
P-HROTO-1 Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
  • Footswitch Hole Diameter: 0.492 in. (12.5mm)
  • Potentiometer Hole Diameter: 0.294 in. (7.47mm)
  • Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
P-H1431-22X Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $12.95
P-HCH02-B Chassis - Fender Style 5E3 Tweed Deluxe, Belton Socket Compatible
Fender® style narrow panel tweed Deluxe™(5E3) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
  • Chrome plated steel, .045" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 370mm x 106mm x 69mm

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
On Backorder
P-H1431-12X Cover Plate - Hammond, Steel, 7" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $5.95
P-H1441-24X Chassis Box - Hammond, Steel, 12" x 8" x 3"
Colors Available:
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
  • Spot welded heavy duty construction chassis.
  • 0.036"" thick.
  • Dimensions shown are exterior dimensions.
  • Does not include cover. See P-H1431-22 Key
Starting at $37.48
Note: P-H1441-24BK3: Black is a special order item.
P-H1441-12X Chassis Box - Hammond, Steel, 7" x 5" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3
Starting at $16.45
P-HCH02 Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
P-HFZ-2 Chassis - Mod® Electronics, MK1 Fuzz, Pre-drilled, Folded 16 ga. Steel
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original MK1 Tone Bender enclosures and is pre-drilled to match the original layout of the MK1 pedal. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The MK1 fuzz enclosure features a removable bottom door for easy access to the battery. All required screws and rubber feet are included.
$49.95
P-HFZ-3-DGRY Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
P-HCH03 Chassis - Fender Style 5F2 Tweed Princeton
Fender® style narrow panel Tweed Princeton™(5F2) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"
$75.95
P-H1441-29X Chassis Box - Hammond, Steel, 12" x 10" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036 thick. Does not include cover. please refer to P-H1431-29
Starting at $37.48
P-HCH05 Chassis - Fender Style 5F1 Tweed Champ
Fender® style Tweed Champ™(5F1) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"
$62.95
P-H1441-26X Chassis Box - Hammond, Steel, 16" x 8" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26
$40.00
P-H1431-30X Cover Plate - Hammond, Steel, 17" x 10", 20 Gauge
Colors Available:
20 gauge. Cover for chassis box 17 inch wide by 10 inch deep. Spot welded steel - heavy duty construction chassis. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
$19.35
P-H1441-22X Chassis Box - Hammond, Steel, 12" x 8" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3
$38.80
P-H1441-16X Chassis Box - Hammond, Steel, 10" x 6" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See or P-H1431-16BK3
$23.00
P-HCH04 Chassis - Fender Style 5F6A Tweed Bassman
Fender® style narrow panel Tweed Bassman™(5F6A) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''
$79.95
P-HFZ-1 Chassis - Mod® Electronics, Wedge Shaped Fuzz, Pre-drilled, Folded 20 ga. Steel
Pre-drilled wedge shaped pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original FZ-1 and FZ-1A Fuzz Tone enclosures but the predilled layout is inspired by the Octavio and the early Carlsbro fuzz. This provides a classic pedal design with a layout that is more compatible with modern pedalboards than the original Fuzz Tone layout. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The wedge shaped fuzz enclosure features a hinged bottom cover for easy access to the battery. The four screws that attach the bottom are included.
$36.95
P-H1441-32X Chassis Box - Hammond, Steel, 17" x 10" x 3"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-32 or P-H1431-32BK3
$53.30
P-H1451-22X Chassis Cage - Hammond, Steel, 12" x 8" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.

For satin black version, see P-H1451-22BK3
$66.45
P-H1454F Amp-top Enclosure - Hammond, 20 ga. Steel, 4" x 6" x 3"
High quality powder coated amp-top enclosures from Hammond’s 1454 Series. These cases are a great choice for amp top effects such as the Dallas Rangemaster. Features
  • Made of strong, economical 20 gauge steel.
  • Rugged powder coat finish: beige panels with textured black covers.
  • Choice of sloping or vertical front panels by reversing the case.
  • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
$27.15
P-H1431-26X Cover Plate - Hammond, Steel, 16" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 16” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $15.23
Note: P-H1431-26BK3: Black is a special order item.
P-HCH05-B Chassis - Fender Style 5F1 Tweed Champ, Belton Socket Compatible
Fender® style tweed Champ™(5F1) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
  • Chrome plated steel, .045" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-¾" x 4-⅛" x 2 ⅝"
$62.95
Don't see what you're looking for? Send us your product suggestions!