Enclosures / Chassis

P-H1590N1CE-X Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41"
Colors Available:
Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.
Starting at $6.95
P-H1590BBCE-X Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $5.40
P-H1590BCEX Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
P-H1590LBCE Chassis Box - 1590LB, Diecast, 1.99″ x 1.99″ x 1.22″
1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.
$3.95
P-H1590XXCE Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
P-H1590ACE-X Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Starting at $6.29
P-H1590TRPB-X Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Colors Available:
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $10.95
P-H1590BX Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
P-H1590BBX Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
P-H-YY-X Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66"
Colors Available:
New!:
Slanted YY enclosures perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction
Starting at $23.95
P-H1590BB-GORVA-X Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
Colors Available:
New!:
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.
Starting at $10.95
P-H1590CCE Chassis Box - 1590C, Diecast, 4.72" x 3.70" x 2.10"
4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.
$7.95
P-HWAH Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$40.00
P-H1590J-X Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
New!:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $13.95
P-H1590N1-GORVA-X Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
Colors Available:
New!:
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
  • Slightly beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $10.45
P-H1032L Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
P-H-YY-HMT-GN Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66", Hammered Green
Limited Run!
YY enclosure finished in a hammered green powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Hammered green powdercoat
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$28.95
Out of Stock
P-H1590N1CE-HMT-BRZ Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Bronze
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered bronze powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.75
Out of Stock
P-H1590N1CE-HMT-GN Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Green
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered green powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.75
Out of Stock
P-H-YY-HMT-BRZ Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66", Hammered Bronze
Limited Run!
YY enclosure finished in a hammered bronze powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Hammered bronze powdercoat
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$28.95
Out of Stock
P-H1590BBCE-HMT-BRZ Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Bronze
Limited Run!
1590BB diecast enclosure finished in a hammered bronze powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
P-H1590BCE-HMT-GN Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Green
Limited Run!
1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
P-H1590B2 Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
P-H1590BB2 Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$11.95
Don't see what you're looking for? Send us your product suggestions!