Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!
K-997 Effects Pedal Kit - MOD® Kits, Erratic Clutch Deluxe, Fuzz/Divider
The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
$69.95
K-996 Effects Pedal Kit - MOD® Kits, The Penetrator, Treble Boost
The Penetrator is a treble boost pedal kit with enough gain to cut straight through any mix. This pedal adds glistening harmonics that get loud enough to saturate your amp’s front end. Adjust the level knob to vary the output so there’s no mistaking when you kick this pedal in. Great for solos or when you need your guitar front and center.
$38.95
K-991 Effects Pedal Kit - MOD® Kits, The Rock Bottom, Bass Fuzz
The Rock Bottom is a bass fuzz kit that gives you all of the sizzle you'd expect from a vintage fuzz without sacrificing those low frequencies. Use the blend pot to set your fuzz levels and dial in the volume to get that sound you need. This versatile pedal can be used for the sludgiest bass tones to the cleanest boost and everything in-between.
$43.95
P-RBTSE-99FX DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
P-ECB-004 Power Supply - Dunlop, 18V A/C Adapter
The Dunlop 18V power supply for Dunlop effects will save you some money on batteries and get the right power to your pedal! Features Include:
  • 18 volts of regulated DC current
  • 2.1 mm x 5.5 mm plug with negative center

Compatible Dunlop pedals include:
  • Older Crybaby Multi-Wah
  • SW-95 Slash Wah
  • M108 10-band EQ
  • KFK1 10-band EQ
  • M117R Flanger
  • EVH 117 Flanger
  • DD11 Dime Distortion
  • M134 Chorus
  • M181 Bass Blowtorch

Plus many other pedals requiring an 18vdc power supply!
$15.95
K-980 Effects Pedal Kit - MOD® Kits, The Persuader Deluxe, Overdrive
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion. Four dual triode vacuum tubes are included with each kit (JJ 5751, 12AX7B China, JJ 12AU7 and a NOS USA-made 12AT7). Swap to create a wide range of tones from just a hint of break up from the JJ 5751 to over the top crunchy distortion using the NOS US made 12AT7. A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$99.95
P-H501 Switch - Footswitch, 3PDT, Blue, Taiwan
Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in Taiwan.
$6.95
P-H501-PC Switch - Footswitch, 3PDT, Blue, PC Mount
3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.
$7.95
P-H498 Switch - Footswitch, DPDT
Great replacement for stomp-box effects requiring a DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.
$3.95
K-978 Effects Pedal Kit - MOD® Kits, Step Ladder, Input Attenuator
The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
$36.95
P-H492 Switch - Carling, Footswitch, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H493 Switch - Carling, Footswitch, SPST, for Fender® & Others
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$5.95
M-PAS-B Kit - Power All System Basic, For Effects Pedals
The Power-All PA-9 Digital Power Supply is the world’s first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don’t waste money on batteries or take up valuable space with multiple “wall wart” adaptors or power bricks – the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The Power-All provides 9 volts DC at 2000 milliamps – more than enough current to power dozens of effect pedals, including up to four Line 6 Modelers! The Power-All’s special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9 now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.
$24.95
K-976 Effects Pedal Kit - MOD® Kits, Resonator Deluxe, Octave-Up Fuzz
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
$74.95
P-H604 Switch - Footswitch, SPST, Off-(On), Solder Lugs, Soft Switch
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching.
These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications.
Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.
  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included

Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$2.50
P-ECB-035 Switch - Dunlop, Footswitch, GCB-95
GCB-95 switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$9.95
P-ECB-555 Switch - Dunlop, Footswitch, DPDT, Solder Lugs, for MXR
Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR and other effects pedals. Made in Mexico.
$14.95
K-977 Effects Pedal Kit - MOD® Kits, Suspended Chime, Chorus, Delay
The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
$99.95
On Backorder
M-FANTA Effects pedal - Tube Amp Doctor, F.A.N.T.A. Speaker Emulator
The F. A. N. T. A. (Frequency Adapted Natural Tone Accessory, say: 'FANTA') Speaker Emulation is a low impedance, balanced symmetric, transformer coupled output. It gets wired between the speaker output of your amp and the speakers and does not require any power supply or battery. The F.A.N.T.A. provides a 3-pin XLR-Connector for a standard microphone cable to connect to the mixing console, recording system etc. The signal runs through a sophisticated speaker emulation which features a revolutionary unique quality: The emulation is reacting to your playing style!
$99.95
M-PAS-S Power Supply - Power-All System, 9V, 2000mA, for Effects Pedals
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The Power-All's special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9S now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.
$19.95
P-H16-150 Bumper - Morley, tapered rubber feet, self adhesive
Package of 20
Small tapered rubber feet with self-adhesive backing (package of 20). Can be used to provide grip and slight elevation (about 0.14") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack.
$5.00
S-H155 Battery Clip - 9 Volt
Package of 3
9 volt battery clip with 5 3/4" red and black wire lengths. Simple construction and perfect for use in effects pedals. Package of three.
$0.60
P-H497 Switch - Carling, Footswitch, DPDT, On-On, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V
Note: On-On switches may sometimes be referred to as On-None-On.
$7.95
P-RBTDR-1H-X Reverb Module - Accutronics Belton, Digi-Log, horizontal mount
A great digital reverb sound that easily replaces a spring reverberation unit. Simple interface requires only input, output, +5V, and ground. Output requires no external capacitors.
Starting at $12.95
Don't see what you're looking for? Send us your product suggestions!