A new look is coming for Amplified Parts! Click here to find out about the coming changes!

You are here

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects.

Build a kit or purchase parts to make your own!

 

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-ECB-25PC Board - Dunlop, for Crybaby

Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.


$21.95
Click to read more
P-ECB-24APotentiometer - Dunlop Hot Potz, 470K

Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470K ohm. Original Dunlop replacement part.


$20.95
Click to read more
P-H1590BChassis Box - Hammond, Unpainted Aluminum, 4.37" x 2.37" x 1.22"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.96
Click to read more
P-ECB-124Grommets - Dunlop, Offset, 3x4 Different Sizes
Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.
$5.95
Click to read more
P-L700-XLED - 5mm, Water Clear, High Brightness, Package of 5 (Package of 5)
Colors Available:

High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.



  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5

Starting at $1.30
Click to read more
P-H553Switch - Carling, Footswitch, SPST, On-(Off), Solder Lugs
Carling footswitch, SPST, momentary On-(Off) normally closed with solder lugs.

Note: On-(Off) switches may sometimes be referred to as On-None-(Off).
$7.95
Click to read more
P-H1590LBChassis Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.03
Click to read more
P-RBTDR-2V-XReverb Module - Accutronics, Digi-Log, Mini, Vertical Mount

A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface requires only input, output, +5V, and ground.


$14.95
Click to read more
K-975Effects Pedal Kit - MOD® Kits, Ring Resonator, Octave-Up Fuzz
The Ring Resonator is the newest member of the MOD® Kits DIY family. Order now to be one of the first people to get this new octave up fuzz pedal!
The Ring Resonator kit is an octave up fuzz effect; an all analog design that captures those late '60s octave-up fuzz tones. Transformer coupled germanium diodes produce sounds that range from a subtle octave up to thick, harmonically rich sonic textures and synth-like tones. Experimenting with different pickups and tone control settings on your guitar with the Ring Resonator can also produce sitar-like sounds.
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
The effect pedal operates on a 9V battery.
$64.95
Click to read more
P-ECB-GEARGear - for Wah Potentiometer
Generic gear (a.k.a. pinion) for wah-style potentiometers. Outer diameter = 0.48", height = 0.61". Push-on for splined 1/4" shaft.
Push-on mounting allows any 1/4" splined shaft potentiometer to be equipped for use with rack and pinion shaft rotation as in a wah pedal.
$1.50
Click to read more

Pages

(12 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts