Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!
P-ECB-9V2 Battery Box - Gotoh, Dual, 9 Volt
Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries.
Four wood screws included.
Directions:
1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24")
2. Put the box in guitar body and fix it by screws.
$19.00
P-RBTDR-3H Reverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface: input, output, +5V, and ground
$15.95
K-965 Effects Pedal Kit - MOD® Kits, The Contortionist II, Fuzz
The Contortionist II kit is an all analog, high octane fuzz box. It produces fuzz with layered octave overtones similar to those produced by an electronic-bow. The frequency multiplier circuitry creates harmonics that swell and recede depending on gain setting, pick attack, neck position and pickup.
This is a high gain circuit that can put out up to 2 volts and will provide ample amounts of sustain. The Contortionist II has all the features of the original Contortionist with an added tone control for a wider range of sounds, and an LED that lights up when the unit is activated.
$47.95
R-VWAH-POT-X Potentiometer - Wah Pot
Resistances Available:
Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
Starting at $1.46
Save 84%
Originally: $8.95
P-L400 LED Holder - 3mm, Red LED
Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°
$0.75
P-H1590BBCE-X Chassis Box - Diecast Aluminum, Colored
Colors Available:
Cool chassis box perfectly suited for effects pedals and other DIY projects.
  • 4.67" x 3.68" x 1.18"
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Painted
Starting at $7.95
Save 14%
Originally: $9.25
P-ECB-131 Knob Cover - Dunlop
Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
$1.65
P-H1590BCE Chassis Box - Diecast Aluminum, 4.39" x 2.34" x 1.06"
4.39" x 2.34" x 1.06" D. Equivalent to Hammond P-H1590B.
$5.95
P-ECB-24A Potentiometer - Dunlop Hot Potz, 470K
Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470K ohm. Original Dunlop replacement part.
$20.95
P-ECB-130 Knob - Dunlop, MXR Knob for Pedal
Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.
$2.95
P-L600-X LED - 3mm, Water Clear, High Brightness, Package of 5
(Package of 5)
Colors Available:
High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 3mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.30
K-985 Effects Pedal Kit - MOD® Kits, The Wahtz, Wah
The Wahtz Wah Pedal Kit produces the classic Wah tone you've come expect with a hint of extra bite and growl.
True bypass switching insures no loss of signal when the Wah effect is not engaged; and the long life potentiometer manufactured specifically for use in Wah pedals is included to provide years of smooth, quiet operation.
Point to point construction allows advanced kit builders to easily experiment with modifications to further tailor the tone to more individual tastes.
MOD® Kits and Assemblies are designed to give novice and experienced musicians the opportunity to build or modify their own amps, effects pedals and guitars. All kits come with easy-to-follow instructions and use point-to-point wiring. All effect pedals and amplifiers come with a pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
$109.95
P-ECB-FI-02 Inductor - Dunlop, Fasel Toroidal Model, Red
This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.
$12.75
P-H552 Footswitch - Carling, SPST, Off-(On), Solder Lugs
Carling, SPST footswitch, momentary Off-(On), normally open with solder lugs.
Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$7.95
M-PAS-S Power Supply - Power-All System, 9V, 2000mA, for Effects Pedals
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The Power-All's special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9S now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.
$19.95
P-ECB-244 Battery Box - Dunlop
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$1.75
P-H503 Switch - Footswitch, DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A
$3.95
P-L200 LED Holder - 3mm
Holder for LED.
$0.65
P-ECB-25 PC Board - Dunlop, for Crybaby
Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
$21.95
P-H1590B Chassis Box - Hammond, Unpainted Aluminum, 4.37" x 2.37" x 1.22"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$7.07
P-ECB-124 Grommets - Dunlop, Offset, 3x4 Different Sizes
Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.
$5.95
P-L700-X LED - 5mm, Water Clear, High Brightness, Package of 5
(Package of 5)
Colors Available:
High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.30
P-H553 Switch - Carling, Footswitch, SPST, On-(Off), Solder Lugs
Carling footswitch, SPST, momentary On-(Off) normally closed with solder lugs.
Note: On-(Off) switches may sometimes be referred to as On-None-(Off).
$7.95
P-H1590LB Chassis Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$6.14
Don't see what you're looking for? Send us your product suggestions!