Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!
P-L600-X LED - 3mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 3mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.30
P-L700-X LED - 5mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.30
P-L300X LED - 3mm diameter, diffused lens
Package of 5
Colors Available:
Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.
$0.65
P-H511 Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary, push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.
$2.50
P-ECB-151 Rubber feet - Dunlop, for Crybaby, includes screws
Package of 4
Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)
$2.60
P-H493 Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$5.95
P-L500 Bezel with LED Lamp - 5mm Red LED with holder
5 mm diameter Red LED with holder. Perfect for amps and effects. Mounts in a 5/16" diameter chassis hole.
$0.95
P-RBTDR-3H Reverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface: input, output, +5V, and ground
$15.95
P-H492 Footswitch - Carling, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H590-X Footswitch - 3PDT, LED Ring
Colors Available:
3PDT. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
P-H604 Footswitch - SPST, Momentary, Solder Lugs, Soft Switch
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.
  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included

Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$2.85
P-H1590BX Chassis Box - Hammond, Diecast Aluminum, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.07
S-H750-X Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal
Colors Available:
½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
$0.95
P-L200 LED Holder - for mounting 3mm LEDs
Holder for mounting LEDs to panels.
$0.65
P-RBTDR-2H-X Reverb Module - Accutronics Belton, Digi-Log, horizontal, mini
A great digital reverb sound that easily replaces a spring reverberation unit. Small package is half the size of the P-RBTDR-1H-X
$14.95
P-H552X Footswitch - Carling, SPST, Momentary, Solder Lugs
Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$7.95
P-ECB-24B Potentiometer - Dunlop, Hot Potz II Crybaby, 100 kΩ
Hot Potz II Crybaby Pot. for newer Crybaby models. Made by Beckman. 100 kΩ. Original Dunlop replacement part. The same tone and sweep characteristics as the original Cry Baby Hot Potz potentiometer with low wiper noise and extended life.
$20.59
P-ECB-035 Switch - Dunlop, Footswitch, GCB-95
GCB-95 switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$9.95
P-ECB-124 Grommets - Dunlop, Offset, 3x4 Different Sizes
Package of 12
Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.
$6.95
P-ECB-244 Battery Box - Dunlop, snap-in
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$1.95
P-H1590N1CE Chassis Box - Diecast Aluminum, 4.77" x 2.60" x 1.39"
Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.60" x 1.39".
$6.59
P-LRING-X LED - Footswitch Ring, With Bezel, 9V
Colors Available:
Leaded LED rings for use with standard footswitches.These LED rings use an array of LED's with internal current limiting so no additional parts are required for use with 9VDC. Red, green, blue, and two-color combinations are available. A 15mm panel hole is required. See full dimensions below to check footswitch compatibility.
Starting at $1.50
P-H1590A Chassis Box - Hammond, Diecast Aluminum, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$6.22
P-LTX387 Bulb - Morley, Effects Pedals Replacement
AML387 incandescent light bulb, T-1 3/4 midget flanged, miniature lamp. Great replacement for Morley.
$0.95
Don't see what you're looking for? Send us your product suggestions!