Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!

Belton

TWA Fly Boys

TWA Fly Boys manufacture ultra-compact and affordable effect pedals.

ProCo

ProCo was founded in 1974 and builds audio interface products from guitar and microphone cables to electric guitar pedals.

Hammond

Hammond Manufacturing offers a full range of transformers, chokes and enclosures.

Carling

A large manufacturer of switches and other electronic controls.
P-H493 Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$5.95
P-H492 Footswitch - Carling, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H552X Footswitch - Carling, SPST, Momentary, Solder Lugs
Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$7.95
P-H550 Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
P-H1590BX Chassis Box - Hammond, Diecast Aluminum, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.07
P-H1590A Chassis Box - Hammond, Diecast Aluminum, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$6.22
P-H1590LBX Chassis Box - Hammond, Diecast Aluminum, 1.99" x 1.99" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $6.14
P-H1590XX Chassis Box - Hammond, Diecast Aluminum, 5.3" x 4.4" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$13.02
P-H1590D Chassis Box - Hammond, Diecast Aluminum, 7.38" x 4.70" x 2.05"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$19.34
P-H1590BBX Chassis Box - Hammond, Diecast Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $9.42
P-H1590CX Chassis Box - Hammond, Diecast Aluminum, 4.72" x 3.70" x 2.10"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $11.32
P-H1590N1 Chassis Box - Hammond, Diecast Aluminum, 4.77" x 2.6" x 1.39"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
$10.81
P-H551 Switch - Carling, Footswitch, SPST, Off-(On), Screw Terminals
Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$4.06
Save 42%
Originally: $6.95
P-H1590X Chassis Box - Hammond, Diecast Aluminum, 5.7" x 4.8" x 2.1"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.34
M-RAT2 Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
$82.95
P-H1590F Chassis Box - Hammond, Diecast Aluminum, 7.38" x 7.38" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$27.31
On Backorder
P-H1590E Chassis Box - Hammond, Diecast Aluminum, 7.38" x 4.70" x 3.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$21.69
M-FLYECHO Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
$79.00
P-H497 Footswitch - Carling, DPDT, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.
$7.95
P-H1590V Chassis Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54"
Special Order Item
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$23.15
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!