Driver - Peavey, 1", RX 14, high frequency compression, 60W
The RX14 compression driver is designed for excellent driver performance, reliability and power handling. With over 25 years experience in compression driver design and manufacturing, Peavey is proud to add the all-new RX14 compression driver to its transducer line.
The RX14 is capable of higher power handling than most similiar-sized compression drivers and incorporates a 1.4" voice coil. The RX14 is designed with a solid one-piece titanium diaphragm and a Kapton high-temperature coil former with copper-clad aluminum coil wire for an increase in the overall motor efficiency. The one-piece titanium diaphragm reduces the amount of moving mass, extending the high frequency response of the driver. Ferrofluid cooling is used in the RX14 for improved reliability and smoother frequency response. Every RX14 driver is subjected to a complete series of computer-based tests designed to ensure total adherence to specifications.
The RX14 has been designed and engineered for use with Peavey horns. However, any horn may be used as long as it consists of a standard 1 3/8” – 18 standard thread coupling. The RX14 is an excellent choice for upgrading an older system at minimal expense.
The RX14 driver is designed for use between the frequencies of 1.5 kHz to 20 kHz. However, in our experience as crossover designers for commercial applications, optimum driver performance and reliability can be achieved if the engineer limits the crossover design to 2 kHz as compared to the 1.5 kHz lower limit of the driver.
1" throat diameter, 8 ohms, 60 watts, 1.5-20k response.
|Continuous Power Rating||30 W|
|D.C. Resistance (Re)||6.8 Ω|
|Diaphragm||Commercially pure titanium|
|Flux Density||1.15 T|
|Frequency Response||1.5 kHz - 20 kHz|
|Horn Coupling Diameter||23.8 mm|
|Horn Coupling Threads||Standard 1.375 in. / 18 in.|
|Impedance, minimum||7.1 Ω|
|Nominal Impedance||8 Ω|
|Peak Power Rating||120 W|
|Program Power Rating||60 W|
|Recommended Crossover||1,800 Hz @ 12 dB / Octave|
|Recommended Minimum Crossover||2,000 Hz @ 12 dB / Octave|
|Sensitivity @ 1W, 1m||104 dB SPL, On-axis on 90° H × 45° V horn|
|Throat Parameter||23.8 mm|
|Voice Coil Cooling||Ferrofluid|
|Voice Coil Diameter||1.4 in.|
|Voice Coil Material||Edge-wound ribbon with high temp Kapton bobbin|
|Packaging Dimensions||4.4 in. × 4.4 in. × 3.5 in.|
|Weight (Packaging)||2.348 lbs.|
|Specification Sheet||All Models|