Clearance Items

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Reverb Tanks

Spring reverb tanks are used to create a unique reverberation effect in guitar amps and organs. The reverberation effect is created when an audio signal created by a transducer is sent through one or more springs, the movement of the springs is then converted back into an audio signal by another transducer at the other end, creating the unique sound. Not sure which tank you're looking for or what a 4AB3C1B is? Check out our spring reverb calculator to help you determine what these tank designations mean!
C-MCS-100 Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
Starting at $21.65
Save 37%
Originally: $34.40
C-OCD1-1500 Capacitor - 1500V, .1µF, Oil
Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.
$5.95
C-PV4700-55-A Capacitor - Peavey, 55V, 4700µF, Axial Lead
Peavey 4700 µF @ 55V polarized electrolytic capacitor with axial leads. 7/8" diameter x 2" length.
$6.95
P-C70-A Antenna Coil - for Tube Radios
Will replace broadcast band coils in any tube type radio. Adjustable inductance for perfect tracking. Mount on bus wire leads or in 5/16" hole for pine board mounting. Coils are similar to Miller numbers that correspond.
  • Primary coil inductance: 2mH
  • Secondary coil inductance: 191uH
$14.95
P-C70-OSC Coil - Miniature adjustable coil, 70, oscillator
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
$14.95
P-C70-RF Coil - Miniature adjustable coil, 70, R.F. stage
Coil is similar to Miller number 70-RF. Coil is similar to Miller number 70-RF R.F. stage coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The R.F. coils have high impedance primaries and wire wound secondaries for use with any variable condenser having a maximum capacity between 250 and 450 mmf. These coils are for use in all common padded and unpadded oscillator circuits.
$14.95
P-RBAG-17-CAMO Reverb Tank Bag - 17 in. Long, Handmade of Camouflage Tolex
Reverb tank bags give the reverb tank better isolation which results in fuller, richer reverb as well as protection from feedback. Handmade of single-ply camouflage tolex. Replacement for Fender and other amps.
$4.31
Save 60%
Originally: $10.75
S-H135 Form - Ceramic, 2-½" x ½" Diameter, 6-32 Threads
Use as a standoff, coil/choke form, or antenna coil.
$0.20
Don't see what you're looking for? Send us your product suggestions!