Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
T-Shirt - Black with 11 Knob, Amplified Parts
Black Amplified Parts 11 knob shirt.
Recone Kit - Celestion, For G12 Blue Guitar Speaker
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)
Effects Pedal - Maxon, CP101, Compressor
The Maxon CP101 is a classic compressor pedal that offers up to 42dB of natural sounding compression for a controlled sound with plenty of sustain. The CP101 is designed to preserve the sound of the guitar with its transparent attack and clean tone. Features
- Clean and natural compression with little change to the original tone
- Limiter-like effects for consistent levels.
- Transparent pick attack and relaxed sustain for lead guitar
- Great for bass guitars and semi-acoustic guitars
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
Hum Exterminator - Morley, Ground Loop Hum Eliminator
The Morley Hum Exterminator™ filters out unwanted voltage on the ground line that can cause ground loop hum. Simply place the Hum Exterminator™ on the end of the power cord of the equipment that has a Ground Loop and plug the Hum Exterminator™ into the wall outlet. Ground Loop is gone and signal remains intact. Easy to use, easy to install, absolutely safe and completely effective!
- Exterminate Ground Hum Right at The Source!
- Designed to solve GROUND RELATED Hum and Buzz
- Filters the Ground Line of Excess Low Voltage and Current that Cause Audio Noise
- Maintains Proper Ground
- NOT a Ground Lift
- Simply Connect Hum Exterminator™ to Power Plug of Offending Gear
- Maximum recommended Current per Hum Exterminator™ Is 6 Amp
- Handy LED Shows Power is On and Unit Is Working
Speaker - Eminence® Patriot, 6", 620H, 20W
Lead/Rhythm 6" guitar speaker. Warm, full, and clean tone that will make a small, thin amp sound bigger and fatter.
Speaker - Celestion, 12", Seventy 80, 80W
This 12 inch guitar speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.The Seventy 80 is detailed and crisply defined, with a tightly controlled low-end and punchy, aggressive upper mid-range. The top-end response is also subtly increased. Used singly, in pairs or quartets – it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.
Speaker - Jensen Smooth Bass, 15", BS15N350A, 350W, 8Ω
The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.
Speaker - Jensen® D-Series, 12", C12D, 150W
The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.
Driver - Celestion, 1", CDX1-1445 Ferrite Compression, 20W, 8Ω
- 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
- 20Wrms power handling (AES standard) and 106dB sensitivity
- One piece PETP diaphragm and surround
- Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
- Suitable for 2-way and 3-way systems
Speaker - Celestion, 12", G12 Ruby, 35W
The Celestion Ruby is vintage voiced alnico speaker that straddles the classic chime of the Blue and celebrated warmth of the modern Cream. The Ruby features a rich and musical frequency response with smooth, airy highs and a nuanced midrange with the natural bite found only in a vintage alnico speaker. This versatile 35 watt speaker is an excellent choice for a 4x12 cabinet and really shines in a single 12” cabinet or combo amp. The Celestion Ruby offers guitar players the ability to discover new tones within the spectrum of vintage sound.
Speaker - Celestion, 12", G12T Hot 100, 100W
With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. It voices a modern sound with a big bass presence.
Speaker - Jensen® Jets, 12", Tornado Stealth 80, 80W
The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.
Speaker - Jensen® MOD®, 12", MOD12-110, 110W
The Mod 12-110 is a 12" ferrite speaker with 110 watts of power. Strong, punchy, and articulate with emphasis on the mids. It responds to overdrive distortion with a tight and balanced fuzz that remains strong and straightforward.
Speaker - Jensen® D-Series, 12", N12D, 150W
The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.
Speaker - Jensen® Vintage Neo, 12", N12K, 100W
The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle.
Terminal Strip - Kulka, 599 Series, Barrier Strip, 7 Pole
High quality seven pole barrier strips made by Kulka / Marathon. These terminal blocks have a solid phenolic base with plated brass terminals and combination head screws. Features:
- Base, Phenolic, 150° C
- Open Back Design (Insulator Strip Required for Voltage Rating)
- Screws, #5-40 Binder Head, Phil-Slot
- Terminals, Plated Brass
- 7 Poles
- 3/8” Centers
- Wire Range With Wire Binding Screw #16-#22 AWG – 15 Amps
- UL Recognized File No. E47811
- CSA Certified File No. LR19766
Bridge - Hipshot, SuperTone, 2 Point BassHipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”
Coil - Miniature adjustable coil, 70, oscillator
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
Cover - Mini Humbucker, 50mm, Nickel Silver, USAOriginal, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Bridge - Bigsby, Telecaster conventionalGenuine Bigsby® conventional Telecaster bridge for use with Bigsby vibrato. This is the stock bridge assembly used in B16 vibratos.
2 13/16” stud spacing.
2 13/16” stud spacing.
Hinge - Bigsby, Gretsch, for vibratoGenuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.
Starting at $18.55
Bridge - Gotoh, Multi Tonal, 4-String Bass, Brass Saddles, Chrome
The Gotoh 404BO-4 is a solid bass bridge for bassists looking for the best performance available from their bridge. The thick hard zinc plate paired with brass saddles offers a balanced tone. The saddles feature two height adjustment screws to dial in the perfect action as well as a wide area of travel for a perfect intonation. The height adjustment screws sit in slots on the bottom plate for additional stability. This string through bass bridge comes with a mounting hardware and also includes a hex wrench for saddle adjustments.
Locking Nut - Gotoh, for Floyd Rose Style Tremolos, Top Mount, 41mmGotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.
Starting at $17.95