Clearance Items
Effect Pedals & Parts
Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$6.19
Save 11%
Originally: $6.95
Triode, Dual, Red Base
$89.67
Save 11%
Originally: $100.75
Package of 25
Oneida brand. Contains 25 of the most popular sizes generally used in Record Changers, Tape Recorders, etc. Use on Turn Tables, Drive Wheels, Idler Wheels, etc.
$0.49
Save 11%
Originally: $0.55
Designed primarily for service as a power rectifier in ac-dc receivers. Two separate rectifier sections permit using the tube as a voltage doubler, full wave rectifier, or half wave rectifier.
$2.45
Save 50%
Originally: $4.90
Package of 4
Decorative head screws, like used for speaker mounting on 1930s vintage radio cabinets. 1 1/2 long.
$0.80
Save 11%
Originally: $0.90
Triple grid sharp cut-off amplifier. It is designed for service in high gain RF and IF amplifier applications and for limited service in FM receivers. The double cathode connection is useful in reducing cathode circuit coupling.
Starting at $4.00
Save 11%
Originally: $4.50
Package of 4
(Metric Threading: M4 x 0.70) - 20 mm long
$0.71
Save 11%
Originally: $0.80
The 5U4G is designed for service as a power rectifier in AC operated receivers which require high currents
Starting at $16.38
Save 11%
Originally: $18.40
Philips ECG, Triode, Medium-MU
$4.95
Save 50%
Originally: $9.90
Filament type general purpose triode especially designed for use in low drain battery operated receivers.
$13.26
Save 11%
Originally: $14.90
The 4D21 / 4-125A is a four-electrode tube designed for use as a power amplifier and oscillator. The anode is capable of dissipating 125 watts, and cooling is accomplished by radiation.
$124.51
Save 11%
Originally: $139.90
The 41 is an indirectly heated cathode type power amplifier pentode designed for service in the output stages of AC, AC/DC and storage battery operated receivers.
Starting at $6.72
Save 11%
Originally: $7.55
Subminiature pentode for use as R.F, M.F., or A.F. amplifier, oscillator, self-oscillating mixer, A.M. detector etc.
$2.95
Save 50%
Originally: $5.90
The 420A electron tube is a double-triode having separate indirectly heated cathodes. The heater is center-tapped to permit operation from a 6.3 or 12.6 volt filament supply.
$4.95
Save 50%
Originally: $9.90
Single heater-cathode type diode intended for service as the damping diode in the horizontal-deflection circuit of television receivers. High output current capabilities make the tube particularly well suited for autotransformer deflection systems
$2.95
Save 50%
Originally: $5.90
Triode, Globe, Long Pin
$48.15
Save 11%
Originally: $54.10
The premium subminiature type 5840 is a sharp cutoff pentode characterized by long life and stable performance under conditions of severe shock, vibration, high temperature and high altitude
$4.95
Save 50%
Originally: $9.90
Special quality pentode designed for use as wide band amplifier.
$6.28
Save 50%
Originally: $12.55
Original Dunlop "slide pad medium" (4 1/2" x 3 3/8"). Perfect fit for MXR Phase 100 and other similarly sized pedal enclosures, including Hammond Mfg 1590BB (see also P-H1590BBCE). Self adhesive backing allows it to be easily secured to the bottom of an enclosure's cover plate. Use as an alternative means to rubber feet for adding grip between the pedal and the floor. No rubber feet are included with this item.
$2.63
Save 11%
Originally: $2.95
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$35.60
Save 11%
Originally: $40.00
Beam power pentode primarily designed for use as the horizontal-deflected amplifier in television receivers. Its high zero-bias plate current at low plate and screen voltages makes the tube well-suited for use in receivers
$3.45
Save 50%
Originally: $6.90
Electro-Harmonix 6SN7 medium-mu twin triode preamp tube. Made in Russia. New low noise HiFi 6SN7.
Starting at $17.36
Save 11%
Originally: $19.50
R.F. pentode with variable transconductance for use as wide-band amplifier.
$2.23
Save 50%
Originally: $4.45
Miniature dual control pentagrid tube intended for use in sync separator circuits. In these circuits it provides improved noise immunity. Both control grids have sharp cut-off characteristics.
$2.45
Save 50%
Originally: $4.90