Effect Pedals & PartsAdding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!
Vacuum TubesThe first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Reverb TanksSpring reverb tanks are used to create a unique reverberation effect in guitar amps and organs. The reverberation effect is created when an audio signal created by a transducer is sent through one or more springs, the movement of the springs is then converted back into an audio signal by another transducer at the other end, creating the unique sound. Not sure which tank you're looking for or what a 4AB3C1B is? Check out our spring reverb calculator to help you determine what these tank designations mean!
Vacuum Tube - C1K / 6014, Thyratron
Compact, quick heating thyratron designed for timing and control applications. It is xenon filled for quick starting and the ability to operate within very wide temperature limits.
Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
Vacuum Tube - 931A-B, Photomultiplier
Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
Vacuum Tube - 7360, Double Plate Beam
Beam-deflection tube for use in balanced-modulator, balanced mixer, and frequency-converter applications in single and double sideband, suppressed-carrier communication equipment operating at frequencies up to 100 Mc.
Vacuum Tube - 6MJ6, Beam Power Pentode
Novar type beam power tube used as a horizontal-deflection amplifier in color and black-and-white television receivers.
Vacuum Tube - 6JT6A, Beam Power Amplifier
Beam power tube for horizontal-deflection-amplifier service in black-and-white TV receivers.
Vacuum Tube - 6FQ5A / 6GK5, Triode, HF
Semi-remote cutoff triode in the 7 pin miniature construction. It is designed for use as a VHF and RF amplifier at a B+ of 135 volts.
Vacuum Tube - 6FH5, Triode, HF
Neutrode triode tuner in the 7 pin miniature construction. It is designed for use in grounded cathode RF amplifiers, with the neutrode construction providing a lower grid to plate capacitance with consequent ease of neutralization.
Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
Vacuum Tube - 5763, Tetrode, Beam Power
Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.
Vacuum Tube - 5726 / 6AL5W, Dual Diode
Twin diode miniature type intended for applications where dependable performance under shock and vibration is paramount. The 5726 is a "premium" version of the 6AL5W
Vacuum Tube - 32, Tetrode
Sharp cut-off tetrode designed for use as a radio-frequency or intermediate-frequency amplifier or as a detector tube in battery operated receivers.
Vacuum Tube - 2-01C, Rectifier
Small, closely spaced, low-capacitance, high-vacuum diode designed for use through ultra-high frequencies. In measurement work, it is well suited to mounting in a probe and will maintain accuracy
Vacuum Tube - 12SG7, Pentode, Semi-Remote Cut-Off, JA
12SG7 - Pentode, Semi-Remote Cut-Off, JA
Vacuum Tube - 12JT6A, Beam Power Amplifier
The 12JT6A is the same as the 6JT6A except for heater characteristics and ratings.
Screw - #8-32, Flower, Nickel
Package of 4Decorative head screws, like used for speaker mounting on 1930s vintage radio cabinets. 1-1/2" long.
Vacuum Tube - 3Q4, Pentode, Power
The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.
Vacuum Tube - 4-125A / 4D21, Tetrode, Power Amplifier
The 4D21 / 4-125A is a four-electrode tube designed for use as a power amplifier and oscillator. The anode is capable of dissipating 125 watts, and cooling is accomplished by radiation.
Vacuum Tube - 5654 / 6AK5W, Pentode, Sharp Cut-Off, RF
Miniature sharp-cutoff pentode for use as a wide-band, high-frequency amplifier. It is also useful in video and audio amplifiers, oscillators, mixers, frequency multipliers, and cathode followers.
Vacuum Tube - 5678, Pentode
Subminiature pentode for use as R.F, M.F., or A.F. amplifier, oscillator, self-oscillating mixer, A.M. detector etc.
Vacuum Tube - 5755 / 420A, Dual Triode
The 420A electron tube is a double-triode having separate indirectly heated cathodes. The heater is center-tapped to permit operation from a 6.3 or 12.6 volt filament supply.
Vacuum Tube - 6012, Tetrode, Thyratron
Isa negative control, xenon filled, four electrode thyratron designed for use in relay and grid-controlled rectifier applications. One type 6012 will carry 0.5 ampere in motor-control and in inverter service.
Vacuum Tube - 6689 / E83F, Pentode, Wide Band Amplifier
Special quality pentode designed for use in telephone equipment.