Clearance Items

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!

Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
K-956 Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe LTD
The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.
The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.
$49.95
K-998 Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack
Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$64.95
K-995 Effects Pedal Kit - MOD® Kits, The Aggressor, Distortion
The Aggressor is a high-gain distortion pedal kit that delivers contemporary distortion with plenty of chunk and ear-splitting pitch harmonics. The distortion effect goes from subtle break-up to over-the-top molten distortion at maximum gain.
The Aggressor features true bypass, LED indicator, and a versatile tone control with a scoop/bump switch that shifts the mid-frequency response, allowing you to craft a tone that fits your style of playing. It works well with humbuckers and single-coil pickups, so you can turn any guitar into a lethal weapon capable of inflicting serious brain damage and spontaneous combustion!
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included.
$74.95
T-C1K_6014 Vacuum Tube - C1K / 6014, Thyratron
Compact, quick heating thyratron designed for timing and control applications. It is xenon filled for quick starting and the ability to operate within very wide temperature limits.
$119.90
T-AZ41 Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
$6.45
Save 50%
Originally: $12.90
T-931A-B Vacuum Tube - 931A-B, Photomultiplier
Multiplier phototube
$24.95
Save 50%
Originally: $49.90
T-8068 Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
$49.95
Save 50%
Originally: $99.90
T-7360 Vacuum Tube - 7360, Double Plate Beam
Beam-deflection tube for use in balanced-modulator, balanced mixer, and frequency-converter applications in single and double sideband, suppressed-carrier communication equipment operating at frequencies up to 100 Mc.
$24.95
Save 50%
Originally: $49.90
T-6MJ6 Vacuum Tube - 6MJ6, Beam Power Pentode
Novar type beam power tube used as a horizontal-deflection amplifier in color and black-and-white television receivers.
$99.90
T-6JT6A Vacuum Tube - 6JT6A, Beam Power Amplifier
Beam power tube for horizontal-deflection-amplifier service in black-and-white TV receivers.
$19.95
Save 50%
Originally: $39.90
T-6FQ5A_6GK5 Vacuum Tube - 6FQ5A / 6GK5, Triode, HF
Semi-remote cutoff triode in the 7 pin miniature construction. It is designed for use as a VHF and RF amplifier at a B+ of 135 volts.
$3.45
Save 50%
Originally: $6.90
T-6FH5 Vacuum Tube - 6FH5, Triode, HF
Neutrode triode tuner in the 7 pin miniature construction. It is designed for use in grounded cathode RF amplifiers, with the neutrode construction providing a lower grid to plate capacitance with consequent ease of neutralization.
$2.95
Save 50%
Originally: $5.90
T-6CN7 Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
$2.45
Save 50%
Originally: $4.90
T-5763 Vacuum Tube - 5763, Tetrode, Beam Power
Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.
$6.45
Save 50%
Originally: $12.90
T-5726_6AL5W Vacuum Tube - 5726 / 6AL5W, Dual Diode
Twin diode miniature type intended for applications where dependable performance under shock and vibration is paramount. The 5726 is a "premium" version of the 6AL5W
$2.45
Save 50%
Originally: $4.90
T-32 Vacuum Tube - 32, Tetrode
Sharp cut-off tetrode designed for use as a radio-frequency or intermediate-frequency amplifier or as a detector tube in battery operated receivers.
$4.45
Save 50%
Originally: $8.90
T-2-01C Vacuum Tube - 2-01C, Rectifier
Small, closely spaced, low-capacitance, high-vacuum diode designed for use through ultra-high frequencies. In measurement work, it is well suited to mounting in a probe and will maintain accuracy
$18.45
Save 50%
Originally: $36.90
T-12SG7-JG Vacuum Tube - 12SG7, Pentode, Semi-Remote Cut-Off, JA
12SG7 - Pentode, Semi-Remote Cut-Off, JA
$2.43
Save 50%
Originally: $4.85
T-12JT6A Vacuum Tube - 12JT6A, Beam Power Amplifier
The 12JT6A is the same as the 6JT6A except for heater characteristics and ratings.
$3.95
Save 50%
Originally: $7.90
T-7025-CHINA Vacuum Tube - 7025, China
7025 - 9 pin miniature preamp tube Made in China Lower hum/noise version of a 12AX7/ECC83 Voltage gain rating: 1 2 3 4 5 6 7 8 9 10 Lows Mids Highs
$14.82
T-3Q4 Vacuum Tube - 3Q4, Pentode, Power
The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.
$2.95
Save 50%
Originally: $5.90
T-4-125A_4D21 Vacuum Tube - 4-125A / 4D21, Tetrode, Power Amplifier
The 4D21 / 4-125A is a four-electrode tube designed for use as a power amplifier and oscillator. The anode is capable of dissipating 125 watts, and cooling is accomplished by radiation.
$139.90
T-5654_6AK5W Vacuum Tube - 5654 / 6AK5W, Pentode, Sharp Cut-Off, RF
Miniature sharp-cutoff pentode for use as a wide-band, high-frequency amplifier. It is also useful in video and audio amplifiers, oscillators, mixers, frequency multipliers, and cathode followers.
$2.45
Save 50%
Originally: $4.90
T-5678 Vacuum Tube - 5678, Pentode
Subminiature pentode for use as R.F, M.F., or A.F. amplifier, oscillator, self-oscillating mixer, A.M. detector etc.
$2.95
Save 50%
Originally: $5.90
Don't see what you're looking for? Send us your product suggestions!