Clearance Items

Low cost, high quality 3.5mm patch cables in a variety of lengths and colors. The cables are super flexible, have a great droop, and are shipped coiled so no permanent kinks are formed. With the large selection of lengths and colors, these cables are the perfect choice for any sized system.

Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.

Metric Threading: M4 x 0.70 - 20 mm long pan head machine screws. Stainless steel.

Plastic panel-mount male XLR jack from Amphenol with a vertical PCB mount. The AC series, A and B type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers’ (OEM) needs in mind. The compact shell design allows a significant space saving over the traditional ‘D’ type shell. Gold plated contacts improve the performance, ensuring a reliable contact and the unique grounding link options offer flexibility in design. Features

• Vertical PCB mount
• Compatible with all other XLR brands
• Gold Contacts
• Precision Machined Pin contacts

Genuine Korg momentary switch used in many Korg products.such as the O5R/W, A1, i30, i30HD, OASYS, Trinity, Triton, Triton EX, Triton Studio, and X5DR.

2A bridge rectifier in an inline package ideal for PCB use. Features:

• Low reverse leakage
• Low forward voltage
• High forward surge current capability

A surface-mount version of P-QLM1458, this LM1458M dual op amp comes in an 8-pin surface-mount package. The LM1458 is a general purpose dual operational amplifier. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent. Features

• No Frequency Compensation Required
• Short-Circuit Protection
• Wide Common-Mode and Differential Voltage Ranges
• Low-Power Consumption
• 8-Lead TO-99 and 8-Lead PDIP
• No Latch Up When Input Common Mode Range is Exceeded

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.

Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.

XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:

• Thermoplastic shell
• Solder Bucket connections
• "Jaws" Cable Retention System
• Stamped contacts
• Leading first mate last break socket contact
• Quick and easy assembly without screws

A1837 Transistor - Fender. Power amplifier applications and Driver Stage Amplifier Applications.

Detachable 3 conductor power cord for United Kingdom wall outlets. Cord end is IEC connected. GTSA-3 (Marshall™ type) 18 AWG. 2-1/2 meters (about 8 feet) length, 1/4” outer diameter.

4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.

XLR 3 Pole female audio cable connector. Musician range. Black finish, silver contact plating. "Jaws" cable retention system.

High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.

The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.

Medium-mu triode in the 7-pin miniature construction. It is designed for local oscillator service in television receivers which operate in the UHF region, internal lead inductance is reduced by employing double connections to the plate and grid.

High quality seven pole barrier strips made by Kulka / Marathon. These terminal blocks have a solid phenolic base with plated brass terminals and combination head screws. Features:

• Base, Phenolic, 150° C
• Open Back Design (Insulator Strip Required for Voltage Rating)
• Screws, #5-40 Binder Head, Phil-Slot
• Terminals, Plated Brass
• 7 Poles
• 3/8” Centers
• Wire Range With Wire Binding Screw #16-#22 AWG – 15 Amps
• UL Recognized File No. E47811
• CSA Certified File No. LR19766

XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:

• Thermoplastic shell
• Solder Bucket connections
• "Jaws" Cable Retention System
• Precision machined contacts
• Leading first mate last break socket contact
• Quick and easy assembly without screws

Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.

Amphenol AX series XLR cable connector, 3 pole male, Machined contacts The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement modern audio architecture and truly “fit" within their environment.