Clearance Items

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!

Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-8950 Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
T-4-125A_4D21 Vacuum Tube - 4-125A / 4D21, Tetrode, Power Amplifier
The 4D21 / 4-125A is a four-electrode tube designed for use as a power amplifier and oscillator. The anode is capable of dissipating 125 watts, and cooling is accomplished by radiation.
T-C1K_6014 Vacuum Tube - C1K / 6014, Thyratron
Compact, quick heating thyratron designed for timing and control applications. It is xenon filled for quick starting and the ability to operate within very wide temperature limits.
T-5692-RED Vacuum Tube - 5692, Triode, Dual, Red Base
Triode, Dual, Red Base
T-6MJ6 Vacuum Tube - 6MJ6, Beam Power Pentode
Novar type beam power tube used as a horizontal-deflection amplifier in color and black-and-white television receivers.
K-995 Effects Pedal Kit - MOD® Kits, The Aggressor, Distortion
The Aggressor is a high-gain distortion pedal kit that delivers contemporary distortion with plenty of chunk and ear-splitting pitch harmonics. The distortion effect goes from subtle break-up to over-the-top molten distortion at maximum gain.
The Aggressor features true bypass, LED indicator, and a versatile tone control with a scoop/bump switch that shifts the mid-frequency response, allowing you to craft a tone that fits your style of playing. It works well with humbuckers and single-coil pickups, so you can turn any guitar into a lethal weapon capable of inflicting serious brain damage and spontaneous combustion!
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included.
K-930 Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions.
K-998 Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack
Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
T-X201A Vacuum Tube - X201A, Triode, Globe, Long Pin
Triode, Globe, Long Pin
T-8068 Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
Save 50%
Originally: $99.90
K-956 Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe LTD
The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.
The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.
T-6012 Vacuum Tube - 6012, Tetrode, Thyratron
Isa negative control, xenon filled, four electrode thyratron designed for use in relay and grid-controlled rectifier applications. One type 6012 will carry 0.5 ampere in motor-control and in inverter service.
Save 50%
Originally: $89.90
T-6V6-C-MP-GT Vacuum Tube - 6V6 C, Groove Tubes, Matched Pair
Octal power tube (Max Plate Watts = 14W) Classic design and affordable. Warm overdrive and soft distortion character. The 6V6 is a low-output power tube (12 - 18 watts) often used in Fender® amplifiers, including the Champ®, Deluxe™, Dual Professional, Vibro-King®, Princeton®, Vibrolux® and others. It has a very warm, round and soft response with rich harmonics, and distorts easily. One of the best choices ever produced for rehearsal and recording amplifiers.
T-7360 Vacuum Tube - 7360, Double Plate Beam
Beam-deflection tube for use in balanced-modulator, balanced mixer, and frequency-converter applications in single and double sideband, suppressed-carrier communication equipment operating at frequencies up to 100 Mc.
Save 50%
Originally: $49.90
T-931A-B Vacuum Tube - 931A-B, Photomultiplier
Multiplier phototube
Save 50%
Originally: $49.90
T-6689_E83F Vacuum Tube - 6689 / E83F, Pentode, Wide Band Amplifier
Special quality pentode designed for use in telephone equipment.
Save 50%
Originally: $39.90
T-6JT6A Vacuum Tube - 6JT6A, Beam Power Amplifier
Beam power tube for horizontal-deflection-amplifier service in black-and-white TV receivers.
Save 50%
Originally: $39.90
T-12AT7-C Vacuum Tube - 12AT7, Ruby
12AT7 Preamp tube, Ruby brand
T-5AR4-CHINA Vacuum Tube - 5AR4, Chinese
Chinese 5AR4 Vacuum Tube
T-2-01C Vacuum Tube - 2-01C, Rectifier
Small, closely spaced, low-capacitance, high-vacuum diode designed for use through ultra-high frequencies. In measurement work, it is well suited to mounting in a probe and will maintain accuracy
Save 50%
Originally: $36.90
T-7025-CHINA Vacuum Tube - 7025, China
7025 - 9 pin miniature preamp tube Made in China Lower hum/noise version of a 12AX7/ECC83 Voltage gain rating: 1 2 3 4 5 6 7 8 9 10 Lows Mids Highs
T-12AT7-CHINA Vacuum Tube - 12AT7, China
Chinese 12AT7 dual triode.
T-12AX7B-CHINA Vacuum Tube - 12AX7B, China
9 pin miniature preamp tube (Amplification Factor = 100). The Chinese 12AX7B is very similar in tone to its standard Chinese cousin, but the Bs seem to average in at slightly lower gain and noise.
T-12AU7-CHINA Vacuum Tube - 12AU7, China
9 pin miniature preamp tube (Amplification Factor = 17)
Don't see what you're looking for? Send us your product suggestions!