Clearance Items

This bridge, popularly referred to as the harmonica bridge is a direct replication of the original using all the same quality fabrication, dimensions and best of all, milled from steel billet to give you the tone you crave. Now there is finally a proper replacement for all those vintage Gibson guitars without having to modify the original instrument! Just when you thought you weren’t going to be able to restore your original hardware, Kluson comes through!

This is the perfect screw assortment for those vintage applications requiring slot head screws. The additional discount purchasing as a kit makes it an unbeatable value.

This McNelly Cornucopia pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.

Bushings, washers and screws for Grover® Machine Heads.

The 8 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

Vibramate Left Handed V5 Adapter Mounting Kit, For Bigsby B5 Now you can install a Bigsby Vibrato on your guitar without drilling any holes! The Vibramate Left Hand V5 Model Quick Mount Kit is designed for a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar. The unit automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance.

Vibramate Short Tail V5 Adaptor Mounting Kit, Left Handed, For Bigsby B5 The Vibramate Left Handed V5 Short Tail Mounting Kit is the same as the Original V5 kit but designed for tighter locations such as the SG Classic style guitars that feature a larger pickguard and require a left handed orientation. The Vibramate V5 is for mounting a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar.

Hollow Point® Intonation System for Double Locking Tremolos. For 6 string guitar. The Hollow Point® Intonation System is designed for use with most Floyd Rose® style/licensed and Ibanez® Edge double locking tremolos where the fine tuner makes direct contact with the string lock screw. Multiple color options available.

Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.

Replacement chrome bridge for Telecaster. Made in Korea.

Orange™ amp head cover. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo. Versions available for:

• CR120H
• Large Amp Heads (Thunderverb / Rockerverb / AD200)
• Small Amp Heads (AD30HTC / Custom / RK30H)

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.

Original Fender® Road Worn® aged white replacement pickup cover set for Strat, package of 3.

Cover with Orange™ logo for cabinets and combos

Peavey Grill Kit (for speaker cone and dust cap protection)

• Manufactured from 1.2mm steel
• Matte black powder coated paint finish
• Surrounded with rubber trim insulator to reduce rattle
• Four 90 degree mounting brackets and 1/4-20 hardware included

These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.

These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design let's the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.

These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.

Original Fender® replacement pickup cover for vintage J-Bass, pkg of 2.

Vibrapod Cones

• Double truncated vinyl cone with 7/16 stationary chrome ball (it does not roll).
• 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
• Designed for use with Vibrapod isolators or by themselves.
• Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane. You will notice an extended, more defined bass, improved imaging and sound stage, greater dynamics and detail, plus sharper video images. VIBRAPOD Isolators and Cones should be placed under flat areas of the component with more at or near the heaviest areas and at the edges.

Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design let's the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.

1" diameter x 1" tall rubber foot with 0.15" mounting hole diameter for #6 screws. Screws not included. Package of 4.