Clearance Items

Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.

• Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
• Standard 2x12 fits AD30TC / RK50C / CR120

Peavey Grill Kit (for speaker cone and dust cap protection)

• Manufactured from 1.2mm steel
• Matte black powder coated paint finish
• Surrounded with rubber trim insulator to reduce rattle
• Four 90 degree mounting brackets and 1/4-20 hardware included

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 5.92k Ohms
• Inductance (henrys) = 3.61
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

Slightly hotter even than the 57 models, these recreations of the 1962 Strat® single coil pickups deliver a true vintage tone that is a blast from the past. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 6.19k Ohms
• Inductance (henrys) = 2.63
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:

• Guitar/ Keyboard/Bass amplifiers and combos
• Audio mixing consoles / Powered mixing consoles
• Stand -alone stereo effect units for studio and PA usage
• Effects pedals

• Primary 115 VAC, 60 Hz.
• Secondary 60 C.T.
• All secondaries center tapped, VAC (RMS)
• Enclosed, 4 hole chassis mount.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees C).
• Hi-Pot test of 2,000V RMS.
• UL listed (# E50394) & CSA certified (209651).

Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. Sealed case and wax potted core internally for stable characteristics and long life. Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.) Insertion loss of apx. 1 db.

Telefunken Brand. Miniature medium-mu twin triode intended for service in radio and television receivers or in audio amplifiers.

Glass octal type used as horizontal-deflection amplifier in color television receivers.

High-perveance beam power amplifier designed as a direct retrofit for the 6AR6 or 6098 in aircraft, military, and industrial applications

Beam-power pentode primarily designed for use in audio-frequency power-amplifier applications. It carries a 42 watt plate dissipation rating which provides for push-pull amplifier designs up to 100 watts output.

Sovtek 6A3 power triode tube. Made in Russia.

Compactron beam-power pentode designed for use in the horizontal deflection amplifier in television receivers. A separate connection is provided for the beam plates to minimize "snivets".

New-Old-Stock (NOS) tube. Compactron twin-triode pentode.

Transmitting triode

Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.

New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.