Clearance Items
by Kevin O'Connor
Every part of your system contributes to your Ultimate Tone, so every part is important. The Ultimate Tone, Volume 5 delineates, in clear language, the function of each electronic component in a circuit, and how alterations to the value of each part affect the final sound. Gain stage voicing, interstage attenuator optimization, sustain restoration for clean and distorted tones, power amp and preamp "tone generators", simple boost pedals, amp selectors and power conditioners are all covered, with designs using off-the-shelf parts. Like TUT3, this is a "project book" presenting design challenges and solutions, with a diversity of tube and solid-state circuits for bass, guitar and keyboards.
$79.95
by Kevin O'Connor
The evolution of guitar amp circuits becomes a revolution! The Ultimate Tone, Volume 6 takes you through advanced DC Power Scaling methods; reveals the secrets of Dumble amps; explores the truth about high-gain preamps; demonstrates how to build Z-B-X push-pull power amps with a single power tube; simplifies the design of 400W+ tube amps - methods that can be applied to any power level; presents class-G tube amps where 100W of output has the same waste heat as a 25W amp; explores modern mains control and sustain circuitry.
$85.00
A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling. With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow-sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack.
$109.00
With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. It voices a modern sound with a big bass presence.
$135.00
Colors Available:
$13.25
Colors Available:
- Post spacing: 2.93 inches (74.5mm)
- Radius: 12 inches (30.48cm)
- String Spacing: 10.4 mm
$37.34
Colors Available:
- Model Name: B-12
- Series: Original Kalamazoo Line
- Manufacturing Method: Sand Cast
- Manufacturing Material: Aluminum
- Approximate weight: 344 grams/12.1 oz.
- Overall Length: 8 3/8" / 212.7 mm
- Overall Width: 3 5/8" / 92.1 mm
- Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
Starting at $179.99
This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.
$199.99
The Gotoh 404BO-4 is a solid bass bridge for bassists looking for the best performance available from their bridge. The thick hard zinc plate paired with brass saddles offers a balanced tone. The saddles feature two height adjustment screws to dial in the perfect action as well as a wide area of travel for a perfect intonation. The height adjustment screws sit in slots on the bottom plate for additional stability. This string through bass bridge comes with a mounting hardware and also includes a hex wrench for saddle adjustments.
$61.50
Colors Available:
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.
Starting at $31.21
Colors Available:
Starting at $48.90
package of 6
Colors Available:
Starting at $84.70
package of 6
Colors Available:
$15.75
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
- Guitar/ Keyboard/Bass amplifiers and combos
- Audio mixing consoles / Powered mixing consoles
- Stand -alone stereo effect units for studio and PA usage
- Effects pedals
$32.00
- Open style, chassis mount transformers with a 115V 60Hz or 50/60Hz primary and an 18V center tapped secondary.
Starting at $12.27
Angled nozzle attachments for the Atten ST-862D hot air station. These attachments are a great accessory allowing for a more relaxed grip and better control. Sold individually.
$5.55
The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.
$214.95
CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.
Starting at $17.45
Beam power tube - high power sensitivity RCA "Dark Heater" with 12 to 15 volt range.
$19.90
High-mu power output triode designed for service in dynamic coupled circuits using a type 76, 6P5GT/G or 6J5GT/G as a driver. Two 6AC5GTs may be used as a zero bias class B amplifier.
$12.90
Beam power tube for horizontal deflection amplifier service in black-and-white TV receivers.
$13.95
Colors Available:
2 13/16” stud spacing.
$46.95
Colors Available:
$8.59