Clearance Items

T-6012 Vacuum Tube - 6012, Tetrode, Thyratron
Isa negative control, xenon filled, four electrode thyratron designed for use in relay and grid-controlled rectifier applications. One type 6012 will carry 0.5 ampere in motor-control and in inverter service.
Save 50%
Originally: $89.90
T-6BY7_EF85 Vacuum Tube - 6BY7 / EF85, Pentode
R.F. pentode with variable transconductance for use as wide-band amplifier.
Save 50%
Originally: $4.45
S-VIBRAX-4 Vibrapod Isolator - Isolate Components
Package of 4
Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane.
Save 10%
Originally: $25.00
T-12JT6A Vacuum Tube - 12JT6A, Beam Power Amplifier
The 12JT6A is the same as the 6JT6A except for heater characteristics and ratings.
Save 50%
Originally: $7.90
T-AZ41 Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
Save 50%
Originally: $12.90
P-GH-FGB-8C Bridge - Hipshot, Fixed Guitar, 8 String, .125" Height, chrome
The 8 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.
Save 10%
Originally: $86.85
P-GTNN-ZBX Nut - Gold Tone, Zero Glide Blank (Unslotted)
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.
Save 10%
Originally: $24.00
P-YJ7591-T Tube Converter - Yellow Jackets®, YJ7591, Triode version
The YJ7591 is a specialized, current-limiting/voltage-conditioning adapter for use in most amplifiers that use 7591 output tubes. Only the triode version will provide a noticeable power reduction. The ground wire connects to chassis-ground for cathode-biased amplifiers. All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
Starting at $40.46
Save 10%
Originally: $44.95
P-RBTSE-99FX DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
Save 10%
Originally: $32.00
S-T265 Fret Leveling File - Diamond, 600 grit, Wooden Grip
600 grit diamond fret leveling file used for leveling frets and beveling fret ends. Comfortable wooden handle.
Save 10%
Originally: $120.00
P-QOPAMPDD Op-Amp - Orange, Dual Discrete, Low-Noise, 8-Pin DIP
The Dual Discrete op-amp is specially designed for audio and is among the most musical sounding dual discrete op-amps out there. It is available in DIP 8 format and can be used in any CD player, DAC, or preamplifier that currently runs DIP 8 based IC dual op-amp types. The overall soundstage and transient detail will be greatly improved when used in pretty much all audio equipment that it can physically be fitted to. It has a very low noise Jfet front end so it can run with input impedances above 1M Ohms if needed. It can replace the following, provided the equipment it’s being used in has 22mm of height clearance and 5mm side clearance (per side).
  • OPA2604
  • OPA2134
  • TL072
  • NE5532
  • LM4562
  • OP275
  • OP285

Please check that the PSU can supply the extra current needed, especially if replacing more than one existing IC op-amp with our op-amp as with all discrete types, they do draw more current.
Save 10%
Originally: $55.00
P-PUMC-CCX-N Pickup - McNelly, Humbucker, Cornucopia, Nickel
This McNelly Cornucopia pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
Save 10%
Originally: $130.00
P-COV-MH-U-X Cover - Mini Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $8.33
Save 10%
Originally: $9.25
P-AM-SC Magnet - Peavey, replacement for Scorpion
Replacement magnet for the Peavey Scorpion speaker.
Save 10%
Originally: $72.95
P-PUFCV-4 Cover - Fender®, for Vintage J-Bass
Package of 2
Original Fender® replacement pickup cover for vintage J-Bass, pkg of 2.
Save 10%
Originally: $8.25
P-QSJ73180 Transistor - Peavey, PNP 180V Output, SJ-73180, 180V, 3A
SJ-73180 (MJ21193), PNP output, 180V, 3A, TO-3 Case.
Save 10%
Originally: $8.50
P-QSJ81180 Transistor - Peavey, NPN 140V Driver, SJ-81180, 180V, 1A
SJ-81180, NPN driver, 180V, 1A, TO-3 Case.
Save 10%
Originally: $8.25
P-QSJE2153 Transistor - Peavey, PNP Darlington, SJE 2153, 80V, 3A
SJE 2153 (TIP107), PNP Darlington, 80V, 3A, TO-3 Case.
Save 10%
Originally: $1.95
T-5692-RED Vacuum Tube - 5692, Triode, Dual, Red Base
Triode, Dual, Red Base
Save 10%
Originally: $100.75
T-4-125A_4D21 Vacuum Tube - 4-125A / 4D21, Tetrode, Power Amplifier
The 4D21 / 4-125A is a four-electrode tube designed for use as a power amplifier and oscillator. The anode is capable of dissipating 125 watts, and cooling is accomplished by radiation.
Save 10%
Originally: $139.90
T-6689_E83F Vacuum Tube - 6689 / E83F, Pentode, Wide Band Amplifier
Special quality pentode designed for use in telephone equipment.
Save 50%
Originally: $39.90
T-8950 Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
Save 10%
Originally: $199.90
S-T233-X Drill Bit - two step, for installing vintage tuners
Two-step drill bit for drilling two-step holes. HSS material. Can be used to install vintage type tuners.
Save 10%
Originally: $69.95
T-6MJ6 Vacuum Tube - 6MJ6, Beam Power Pentode
Novar type beam power tube used as a horizontal-deflection amplifier in color and black-and-white television receivers.
Save 10%
Originally: $99.90
Don't see what you're looking for? Send us your product suggestions!