Clearance Items

P-ST9-213-PC Socket - 9 Pin, Miniature, PC mount, with Shielded Base
Top mount, mounting centers = 1", chassis hole = ¾".
$2.19
P-ST9-AWS-CHINA Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.44
P-TB9-1-3 Terminal Board - one 9 Pin socket, 3 x 6 lugs
Single socket. 3 rows/6 lugs per row, 6 mounting holes. Board dimensions 3 ¾" x 3". Terminals are not pre-wired.
$24.25
T-6CN7 Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
$2.45
Save 50%
Originally: $4.90
T-6CT7_EAF42 Vacuum Tube - 6CT7 / EAF42, Pentode
Single diode, remote cut-off R.F. pentode.
$3.45
Save 50%
Originally: $6.90
T-8068 Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
$49.95
Save 50%
Originally: $99.90
M-PP100 Attenuator - Recycled Sound, Power Plug 100, -10 dB to -30dB
The Power Plug 100 offers the same -10db as the Power Plug Lite (M-PPLITE) but adds another "Bedroom Level" pot for further attenuation of up to -30dB AND is suitable for amps up to 100 watts! Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.
$189.95
M-PPLITE Attenuator - Recycled Sound, Power Plug Lite, -2 dB to -10 dB
The Power Plug Lite offers up to -10db attenuation in a rotary switch with -2db increments. The Power Plug Lite will accept all impedances and is rated for up to 50 watt amps. The same cool extruded aluminum case as the original Power Plug (M-ATT-6-12) for those who want a lighter touch and more control. Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume.
$114.95
P-A-BW12-8 Speaker - Peavey, 12", Black Widow 1201-8 BW, 700W, 8Ω
The 1201 is an 8 ohm, 12" Black Widow/Super Structure speaker intended primarily for sound reinforcement. Offering superior sensitivity and power handling in a 12" speaker, the 1201 utilizes a Kevlar impregnated cone for a smooth response characteristic well suited to vocals, stage monitors, and other compact applications. This model can also be used to provide outstanding mid-bass performance in a multi-way system.
$176.95
P-GV5-LH Vibramate - Standard Kit, Left-Handed, For Bigsby B5
Colors Available:
Vibramate Left Handed V5 Adapter Mounting Kit, For Bigsby B5 Now you can install a Bigsby Vibrato on your guitar without drilling any holes! The Vibramate Left Hand V5 Model Quick Mount Kit is designed for a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar. The unit automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance.
Starting at $79.95
P-H879 Footswitch Box - Marshall, 5 Button with LED
Original Marshall Footswitch, Five Button With LED (Clean, Crunch, Lead, Reverb, FX). 6 Pin DIN Plug. For use with TSL Amps.
$155.95
P-KAMPKNOB-KIT Knob Kit - Various Amp Knobs, 61 Pieces
Package of 61
61 piece amp knob kit. Kit contains the following knobs:
  • 8 × Black Skirted (P-K314-1)
  • 7 × Black Chickenhead (P-K300 )
  • 7 × White Vintage (P-K315-1)
  • 7 × Brown Vintage (P-K316-1)
  • 7 × Black Vintage (P-K325)
  • 7 × Black with Gold Cap (P-K339)
  • 7 × Black with Silver Cap, short (P-K341)
  • 4 × Black with Gold Cap (P-K340)
  • 4 × Black with Silver Cap (P-K342)
  • 3 × Black Scalloped (P-K345)
$92.00
P-KEY-C-F Keyboard Key - Korg, "C" & "F" keys
For use with M1, Trinity, Triton, 01-W, Wavestation and i30 keyboards.
$10.00
P-RBTSE-99FX DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
P-SW-MACT Switch - Korg, Momentary Tactile Switch, Medium Length Actuator
Genuine Korg momentary switch used in many Korg products.such as the O5R/W, A1, i30, i30HD, OASYS, Trinity, Triton, Triton EX, Triton Studio, and X5DR.
$5.95
R-VPE500KASPL-1 Potentiometer - PEC Guitar, 500kΩ, Audio, Long Bushing
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, stainless steel shaft and housing. Mechanical rotation: 314° ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ½" bushing length.
$44.95
S-G407 Tolex - Marshall, Red Elephant, 53.5" Wide
Sold by the yard
Genuine Marshall™ Red Elephant tolex. 53.5" wide. Sold per yard. Product will be in one continuous segment, cut to the ordered length.
$38.95
S-W128 Cord - Korg, AC Power, 125 V, 10 A
AC power cord for the Korg KA-310 power adapter (part number M-K080).
This power cord features a standard IEC C7 non-polarized connector that mates with IEC C8 connectors. These are sometimes referred to as "figure 8" or "shotgun" connectors.
$9.95
T-12JT6A Vacuum Tube - 12JT6A, Beam Power Amplifier
The 12JT6A is the same as the 6JT6A except for heater characteristics and ratings.
$3.95
Save 50%
Originally: $7.90
T-6BY7_EF85 Vacuum Tube - 6BY7 / EF85, Pentode
R.F. pentode with variable transconductance for use as wide-band amplifier.
$2.23
Save 50%
Originally: $4.45
T-7581-TUNG Vacuum Tube - 7581, Tung-Sol
Russian Tung-Sol 7581 tube. Beam power pentode with octal base. (May be substituted for 6L6GC). Made in Russia.
$23.75
T-8950 Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
$199.90
C-MCS-100 Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
Starting at $21.65
Save 37%
Originally: $34.40
P-A-BS15N350A-8 Speaker - Jensen Smooth Bass, 15", BS15N350A, 350W, 8Ω
The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.
$347.10
Don't see what you're looking for? Send us your product suggestions!