Clearance Items

P-QHFA16T Diode - Hexfred, 16A, 600V, ultrafast
High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.
$2.92
Save 27%
Originally: $4.00
S-W130 Cord - Power, for United Kingdom plugs, 8 feet
Detachable 3 conductor power cord for United Kingdom wall outlets. Cord end is IEC connected. GTSA-3 (Marshall™ type) 18 AWG. 2-1/2 meters (about 8 feet) length, 1/4” outer diameter.
$2.79
Save 20%
Originally: $3.50
T-6BS8 Vacuum Tube - 6BS8, Dual Triode
Miniature, medium-mu twin triode designed for use as a VHF cascode amplifier. In this application, section two (pins 1, 2, and 3) is intended for the input section.
$2.95
Save 50%
Originally: $5.90
T-6BY6 Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
$2.95
Save 50%
Originally: $5.90
P-A-BP12250-8 Speaker - Jensen Punch Bass, 12", BP12/250, 250W, 8Ω
The Punch BP 12/250 is a 12" ferrite speaker with 250 watts of power. Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound. Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required.
The 12'' bass speaker provides a good upper mid range tone.
$128.70
P-ECB-24C Potentiometer - Dunlop, 20 kΩ, Custom Taper, Wah Pot, for Bass
Custom taper 20k Dunlop potentiometer used in 105Q Crybaby Bass Wah. 1 million cycles, maintenance free.
$23.50
P-GRV-GP6X0 Cable - Grover, Speaker, Nickel Plugs
Equipped with a ¼" nickel plated straight phone plug. Specifically designed cables prevent shocks and allows for minimum hum or noise providing 100% signal.
Starting at $16.25
P-TUBT-1 Transformer - One Electron, Output, 1600 Ω to 16/8/4 Ω
The UBT-1 from One Electron is a low-impedance single-ended output transformer intended for parallel combinations of tubes running a B+ voltages of 250 to 325 volts, such as: two or three EL34s (triode connected), three 2A3s, two 300Bs, two 6AS7s, etc., as well as single sweep tubes run in 'enhanced-triode' mode, resulting in 10 to 15 watts of output power.
$125.00
R-VB-A-XL Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.625" L x 0.5" D
  • 300° rotation
  • Power Rating: ¼ watt
  • ¼" Knurled 18-Spline Split Shaft
  • ¾" Bushing Length
  • Tolerance: ±20 %
  • Very Low Noise
Starting at $7.50
Save 27%
Originally: $10.25
S-CMP08 Polish - Lizard Spit, VIP Vintage for Instruments, 4 oz.
Lizard Spit vintage polish for all paint surfaces. Removes: Old wax build-up without causing chemical reactions commonly associated with other products. Produces: Brilliant Shine.
$14.41
T-5755_420A Vacuum Tube - 5755 / 420A, Dual Triode
The 420A electron tube is a double-triode having separate indirectly heated cathodes. The heater is center-tapped to permit operation from a 6.3 or 12.6 volt filament supply.
$4.95
Save 50%
Originally: $9.90
T-6HA5_6HM5 Vacuum Tube - 6HA5 / 6HM5, Triode, HI MU
Miniature triode designed particularly for service in VHF television tuners as a grounded-cathode RF amplifier.
$2.95
Save 50%
Originally: $5.90
T-6SH7GT Vacuum Tube - 6SH7GT, Pentode, Sharp Cut-Off, RF
Triple grid sharp cut-off amplifier. It is designed for service in high gain RF and IF amplifier applications and for limited service in FM receivers. The double cathode connection is useful in reducing cathode circuit coupling.
Starting at $4.50
K-MOD101 Amp Kit - MOD® Kits, MOD101 guitar amplifier
MOD 101 Guitar Amp Kit Features:
  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 60W output power into 4, 8, 16 and 20 Ω
  • 1 channel with customizable: tone stack, power tubes, negative feedback, input miller capacitance volt divider/LP filter, and preamp cathode bypass cap (all parts included)
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • DPDT power switch circuit for instant high-voltage drain in power-off
  • Standby Switch
$595.00
M-FLYECHO Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
$79.00
P-A-BW15-8 Speaker - Peavey, 15", Black Widow 1505-8 DT BW, 700W, 8Ω
The 1505DT is an 8 ohm, 15" Black Widow/Super Structure speaker with a curvilinear cone for extended bandwidth. Offering a rare combination of usable frequency response into the mid-range with a smooth powerful low end, the 1505DT, Kevlar cone and long voice coil provide excellent linearity at high drive levels. Excellent as a woofer in multi-way enclosures or as the bottom end in a two-way system.
$186.95
P-A-JC12-100RP Speaker - Jensen® Jets, 12", The Raptor, 100W
The Raptor is one of the newest Jensen speakers, released after a long time in development refining the ideal qualities of a contemporary, sophisticated, touch responsive speaker. The result is a 100W ceramic speaker with a characteristic, vocal, rounded midrange and a silky-smooth top end, all based on a solid, fat and firm bass foundation. Eminently versatile, the Raptor is equally suitable to clean, crunch and lead tones.
$106.60
P-A-MOD15-120 Speaker - Jensen® MOD®, 15", MOD15-120, 120W
The Mod 15-120 is a 15" ferrite speaker with 120 watts of power. Full bodied bass speaker with enough highs for both organs and "heavy" guitar players. The MOD15-120 has a full, boomy low-end focus with subtle highs and responds to overdrive distortion with a gritty edge
$136.43
P-GRV-GP620C Strap locks - Grover, Eagle, Chrome
Package of 2
These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.
$8.29
Save 15%
Originally: $9.75
P-RTAD-4BB3C1B Reverb Tank - Tube Amp Doctor, 4BB3C1B, Long Decay, 2-Spring
  • Replaces: 4BB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 150 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include Fender® Blues Deluxe (original version), Blues Deville (original version), London Reverb, Studio Lead, Harvard Reverb II, Showman 115 (80’s version), Rivera™ Rake, Jake Studio Combo, and Fandango models, Laney™ VC30, Crate™ V-32 Palomino.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
$29.95
R-VPEXASP-1 Potentiometer - PEC Guitar, Audio, Split Shaft
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel split knurled shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ¼" bushing length. 1 watt.
Includes 1 nut and 1 lock washer.
$44.95
S-T233-X Drill Bit - two step, for installing vintage tuners
Two-step drill bit for drilling two-step holes. HSS material. Can be used to install vintage type tuners.
$59.46
Save 15%
Originally: $69.95
S-W110 Wire - 38 AWG, Celanese covered, cotton wrap
Sold by the foot
Celanese covered wire, resembling early cotton covered wire. May be color dyed. Cotton wrap, #38 magnet wire. 20 foot minimum. 105°C temperature rating, 600V. Great for making or rewinding vintage style coils.
$0.15
T-AZ41 Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
$6.45
Save 50%
Originally: $12.90
Don't see what you're looking for? Send us your product suggestions!