Clearance Items

4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.

The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.

Genuine Korg momentary switch used in many Korg products.such as the O5R/W, A1, i30, i30HD, OASYS, Trinity, Triton, Triton EX, Triton Studio, and X5DR.

• Primary 115 VAC, 60 Hz.
• Designed for small power or bias supplies, test equipment, preamps etc.
• Models P-T261C6, P-T261E6, and P-T261G6 can also be used with full wave C.T. rectifiers.
• Economical , two hole, channel bracket, chassis mount.
• Minimum 5" long leads.
• Convenient 6.3 filament/auxiliary winding.

Miniature heptode primarily intended to perform the combined functions of mixer and oscillator in automobile radio receivers. Specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.

Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.

2-pole 1/4" professional right-angle phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

High quality seven pole barrier strips made by Kulka / Marathon. These terminal blocks have a solid phenolic base with plated brass terminals and combination head screws. Features:

• Base, Phenolic, 150° C
• Open Back Design (Insulator Strip Required for Voltage Rating)
• Screws, #5-40 Binder Head, Phil-Slot
• Terminals, Plated Brass
• 7 Poles
• 3/8” Centers
• Wire Range With Wire Binding Screw #16-#22 AWG – 15 Amps
• UL Recognized File No. E47811
• CSA Certified File No. LR19766

High quality 18% Nickel-Silver fret wire in medium sizes.

• 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
• 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Jumbo Sizes - P-GTFW-J-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3

XLR 3 pole female, stamped gold plated contacts, black finish. Features:

• Unique Australian designed shell and housing
• Ergonomic stylish sleeve design for improved grip
• Oversized latch lever preserves your thumb
• Leading first mate last break pin 1 on socket connectors
• Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable
• Overmolded cable support boot
• New socket contact design for improved contact resistance
• Precision machined pin contacts
• Compact 2.5mm (14AWG) solder buckets to reduce soldering time and

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

The YJUni is a simple pin-converting adapter for use in most amps with 6V6 or similar based tubes like 6F6, 6G6, 6K6, 6Y6, etc. The YJUni is shorter than standard Yellow Jacket® converters. It is designed for use in lower power output amps (20 watts or less) when no power reduction is desired.

Lead/rhythm guitar 12" American speakers. Nice warm, fat tone with a little top end bite and clarity.

Amphenol "Musician Series II" Phone Plug. 1/4" Mono straight plug with diecast shell, black finish, gold plated contacts and flexible grommet cable protection. Internal cable clamp fits cable outer diameters ranging from 0.256" to 0.315" (6.5 mm to 8 mm).

Replacement for Bassman heads. Equivalent to #125A13A & #022871.

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.

Double triode with high transconductance and low noise for use as a cascode amplifier in tuners for television receivers.

1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:

• Stylised Shell design with ergonomic grip
• Robust diecast keyed shell
• Great solderability with increased solder area
• Precision machined contacts
• "Jaws" cable retention system
• Quick and easy assembly
• Nickel-plated contacts

High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.

A surface-mount version of P-QLM1458, this LM1458M dual op amp comes in an 8-pin surface-mount package. The LM1458 is a general purpose dual operational amplifier. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent. Features

• No Frequency Compensation Required
• Short-Circuit Protection
• Wide Common-Mode and Differential Voltage Ranges
• Low-Power Consumption
• 8-Lead TO-99 and 8-Lead PDIP
• No Latch Up When Input Common Mode Range is Exceeded

Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.