Clearance Items

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects. Build a kit or purchase parts to make your own!

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
P-H240 Screw - #8-32, Flower, Nickel
Package of 4
Decorative head screws, like used for speaker mounting on 1930s vintage radio cabinets. 1 1/2 long.
$0.80
Save 11%
Originally: $0.90
S-HFW Washer - Flat Fiber
Package of 5
Fiber Flat Washer Outer Diameter = 0.625" Inner Diameter = 0.385" sold in packages of 5
$0.40
Save 11%
Originally: $0.45
C-OCD047-600 Capacitor - 600V, .047µF, Oil-Soaked Polyester
Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.
$4.81
Save 11%
Originally: $5.40
C-AU1-400 Capacitor - Auricap, 400V, Film, 1uF
Sonically transparent high resolution film capacitor.
$22.21
B-307 Most Often Needed Radio Diagrams, Volume 1
by M. N. Beitmain
Radio Diagrams and Servicing Information from 1926 to 1938. Shows circuit diagrams for 600 of the most commonly found radios of that time. A valuable resource for restorations.
$2.90
Save 11%
Originally: $3.26
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
(Metric Threading: M4 x 0.70) - 20 mm long
$0.71
Save 11%
Originally: $0.80
S-H401 Washer - C, Assortment
Package of 25
Oneida brand. Contains 25 of the most popular sizes generally used in Record Changers, Tape Recorders, etc. Use on Turn Tables, Drive Wheels, Idler Wheels, etc.
$0.49
Save 11%
Originally: $0.55
B-697 Radio, Wireless Telephone and Wireless Telegraph Equipment
High quality reprint of early (1920s) Montgomery Ward catalog of wireless equipment. 32 pages of radios, kits, tubes and books as available 70 years ago. Sorry, you can't order from this catalog! 0.2 lbs, 7" x 9.5", 33 pages.
$1.74
Save 11%
Originally: $1.95
A maximum order of 1 is allowed.
P-H551 Switch - Carling, Footswitch, SPST, Off-(On), Screw Terminals
Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$6.19
Save 11%
Originally: $6.95
P-HWAH Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$35.60
Save 11%
Originally: $40.00
C-MCS-100 Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
Starting at $30.62
C-OCD1-1500 Capacitor - 1500V, .1µF, Oil
Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.
$5.30
Save 11%
Originally: $5.95
P-ECB-502 Replacement Pad - Dunlop, Rubber Slide
Original Dunlop "slide pad medium" (4 1/2" x 3 3/8"). Perfect fit for MXR Phase 100 and other similarly sized pedal enclosures, including Hammond Mfg 1590BB (see also P-H1590BBCE). Self adhesive backing allows it to be easily secured to the bottom of an enclosure's cover plate. Use as an alternative means to rubber feet for adding grip between the pedal and the floor. No rubber feet are included with this item.
$2.63
Save 11%
Originally: $2.95
Don't see what you're looking for? Send us your product suggestions!