Clearance Items

Kits & Effect Pedals

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
P-H11-406 Strain Relief - Nylon, 0.12" x 0.22" Wire (SPT-1)
Two conductor, nylon, .12" x .22" wire (SPT-1). Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on flexible power cords. Securely anchors, insulates, and protects cable at panel entry points.
$0.50
B-307 Most Often Needed Radio Diagrams, Volume 1
by M. N. Beitman
Radio Diagrams and Servicing Information from 1926 to 1938. Shows circuit diagrams for 600 of the most commonly found radios of that time. A valuable resource for restorations.
$3.26
P-H2097 Foot - Rubber, 1" height x 1" diameter
Package of 4
1" diameter x 1" tall rubber foot with 0.15" mounting hole diameter for #6 screws. Screws not included. Package of 4.
$5.00
K-930 Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions.
$69.95
K-956 Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe LTD
The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.
The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.
$49.95
P-SP4-477C Tube Base - 4 pin, ceramic, 1.25" diameter
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$2.83
Save 51%
Originally: $5.75
R-V38-KIT Potentiometer Kit - Alpha, ⅜" Bushing
Package of 25
Kit of Alpha potentiometers with 3/8" bushing. Contains the following quantities & values
  • 6 × 1MA (R-V38-1MA)
  • 3 × 250KA (R-V38-250KA)
  • 2 × 100KA (R-V38-100KA)
  • 2 × 100KL (R-V38-100KL)
  • 2 × 250KL (R-V38-250KL)
  • 2 × 25KA (R-V38-25KA)
  • 2 × 25KL (R-V38-25KL)
  • 2 × 500KA (R-V38-500KA)
  • 2 × 500KL (R-V38-500KL)
  • 2 × 5KL (R-V38-5KL)
$39.95
R-VPEXASP-1 Potentiometer - PEC Guitar, Audio, Split Shaft
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel split knurled shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ¼" bushing length. 1 watt.
Includes 1 nut and 1 lock washer.
$44.95
R-VXA-SE Potentiometer - Audio, Knurled Shaft, Sealed, 24mm
Audio, knurled shaft, sealed, 24mm.
$6.80
P-HCO-CAB Amp Cover - Orange, for Cabinets and Combos
Cover with Orange™ logo for cabinets and combos
Starting at $21.25
Save 15%
Originally: $25.00
P-HSG0X-PV Speaker Grill - Peavey, with mounting hardware
Peavey Grill Kit (for speaker cone and dust cap protection)
  • Manufactured from 1.2mm steel
  • Matte black powder coated paint finish
  • Surrounded with rubber trim insulator to reduce rattle
  • Four 90 degree mounting brackets and 1/4-20 hardware included
Starting at $12.95
R-VB-A-XL Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.625" L x 0.5" D
  • 300° rotation
  • Power Rating: ¼ watt
  • ¼" Knurled 18-Spline Split Shaft
  • ¾" Bushing Length
  • Tolerance: ±20 %
  • Very Low Noise
Starting at $13.75
K-995 Effects Pedal Kit - MOD® Kits, The Aggressor, Distortion
The Aggressor is a high-gain distortion pedal kit that delivers contemporary distortion with plenty of chunk and ear-splitting pitch harmonics. The distortion effect goes from subtle break-up to over-the-top molten distortion at maximum gain.
The Aggressor features true bypass, LED indicator, and a versatile tone control with a scoop/bump switch that shifts the mid-frequency response, allowing you to craft a tone that fits your style of playing. It works well with humbuckers and single-coil pickups, so you can turn any guitar into a lethal weapon capable of inflicting serious brain damage and spontaneous combustion!
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included.
$74.95
P-HCO-HEAD Amp Cover - Orange, for Amplifier Heads
Orange™ amp head cover. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo. Versions available for:
  • CR120H
  • Large Amp Heads (Thunderverb / Rockerverb / AD200)
  • Small Amp Heads (AD30HTC / Custom / RK30H)
Starting at $25.24
Save 15%
Originally: $29.69
P-TB9-1-3 Terminal Board - one 9 Pin socket, 3 x 6 lugs
Single socket. 3 rows/6 lugs per row, 6 mounting holes. Board dimensions 3 ¾" x 3". Terminals are not pre-wired.
$24.25
K-998 Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack
Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$64.95
P-ST4-312 Socket - 4 Pin, Ceramic, Bayonet, China
4-pin ceramic bayonet socket used for 300B and 811 tubes.
  • Top mount
  • 2" mounting centers
$7.44
P-ST9-213-PC Socket - 9 Pin, Miniature, PC mount, with Shielded Base
Top mount, mounting centers = 1", chassis hole = ¾".
$2.19
P-TB8-2-2 Terminal Board - two 8 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$33.95
P-TB9-2-3 Terminal Board - two 9 Pin sockets, 3 x 10 lugs
Dual socket. 3 rows/10 lugs per row, 4 mounting holes. Board dimensions 5 ½" x 3 ¾". Terminals are not pre-wired.
$34.95
S-VIBRACONE Vibrapod Cone - 25 lb Support, Can Use with Vibrapods
Vibrapod Cones
  • Double truncated vinyl cone with 7/16 stationary chrome ball (it does not roll).
  • 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
  • Designed for use with Vibrapod isolators or by themselves.
  • Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane. You will notice an extended, more defined bass, improved imaging and sound stage, greater dynamics and detail, plus sharper video images. VIBRAPOD Isolators and Cones should be placed under flat areas of the component with more at or near the heaviest areas and at the edges.
$8.00
P-YJ7591 Tube Converter - Yellow Jackets®, YJ7591
Package of 2
The YJ7591 is a specialized, current-limiting/voltage-conditioning adapter for use in most amplifiers that use 7591 output tubes. Only the triode version will provide a noticeable power reduction. The ground wire connects to chassis-ground for cathode-biased amplifiers. All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
Starting at $38.21
Save 15%
Originally: $44.95
P-ST9-AWS-CHINA Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.44
P-TB9-MK3 Terminal Board - two 9 Pin sockets, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
$25.75
Don't see what you're looking for? Send us your product suggestions!