Clearance Items

Two conductor, nylon, .12" x .22" wire (SPT-1). Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on flexible power cords. Securely anchors, insulates, and protects cable at panel entry points.

Radio Diagrams and Servicing Information from 1926 to 1938. Shows circuit diagrams for 600 of the most commonly found radios of that time. A valuable resource for restorations.

1" diameter x 1" tall rubber foot with 0.15" mounting hole diameter for #6 screws. Screws not included. Package of 4.

4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.

Cover with Orange™ logo for cabinets and combos

Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).

Peavey Grill Kit (for speaker cone and dust cap protection)

• Manufactured from 1.2mm steel
• Matte black powder coated paint finish
• Surrounded with rubber trim insulator to reduce rattle
• Four 90 degree mounting brackets and 1/4-20 hardware included

Orange™ amp head cover. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo. Versions available for:

• CR120H
• Large Amp Heads (Thunderverb / Rockerverb / AD200)
• Small Amp Heads (AD30HTC / Custom / RK30H)

Single socket. 3 rows/6 lugs per row, 6 mounting holes. Board dimensions 3 ¾" x 3". Terminals are not pre-wired.

Genuine Korg momentary switch used in many Korg products.such as the O5R/W, A1, i30, i30HD, OASYS, Trinity, Triton, Triton EX, Triton Studio, and X5DR.

4-pin ceramic bayonet socket used for 300B and 811 tubes.

• Top mount
• 2" mounting centers

Top mount, mounting centers = 1", chassis hole = ¾".

Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.

Dual socket. 3 rows/10 lugs per row, 4 mounting holes. Board dimensions 5 ½" x 3 ¾". Terminals are not pre-wired.

Vibrapod Cones

• Double truncated vinyl cone with 7/16 stationary chrome ball (it does not roll).
• 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
• Designed for use with Vibrapod isolators or by themselves.
• Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane. You will notice an extended, more defined bass, improved imaging and sound stage, greater dynamics and detail, plus sharper video images. VIBRAPOD Isolators and Cones should be placed under flat areas of the component with more at or near the heaviest areas and at the edges.

The YJ7591 is a specialized, current-limiting/voltage-conditioning adapter for use in most amplifiers that use 7591 output tubes. Only the triode version will provide a noticeable power reduction. The ground wire connects to chassis-ground for cathode-biased amplifiers. All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.

9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane.

The YJ7591 is a specialized, current-limiting/voltage-conditioning adapter for use in most amplifiers that use 7591 output tubes. Only the triode version will provide a noticeable power reduction. The ground wire connects to chassis-ground for cathode-biased amplifiers. All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.

The YJ20 is for use in most amplifiers using 6V6 output tubes. The YJ20 is similar to the YJC but does not drop the plate and screen voltages. It is meant for use in lower power output amps (20 watts or less) when no power reduction is desired. The ground wire connects to the chassis-ground for cathode-biased amplifiers. All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.

The YJC is similar to the YJS, but for use in amps with cathode-biased power tubes. Cathode-biased power tubes have a bias resistor connected from their cathode to ground. The ground wire of the YJC is used to bypass the amp’s cathode bias components so the Yellow Jacket® converter’s internal bias components are used instead. All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.