Circuit Design

S-T156 Heat Sink - dissipate heat during soldering
Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.
$1.56
Save 11%
Originally: $1.75
S-T9004 Solder - Kester, 60 / 40, 44 Flux, 66 Core, .031 Dia, .5 oz
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
$5.14
Save 11%
Originally: $5.78
S-TPTP7 Soldering iron tip - Weller, conical, for WTCPT
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP
  • PT Series Screwdriver Tip for TC201 Series Iron
  • Solid copper, plated with iron all over
  • Designed to provide maximum heat transfer from the heater to the tip
  • Tinned with lead-free solder
  • Use only genuine Weller tips
$4.54
Save 11%
Originally: $5.10
S-T22-X Solder wick - GC Braid, multiple sizes
5 feet Long. Great for removing solder from printed circuit boards.
Starting at $3.11
Save 11%
Originally: $3.50
S-T7875B Desoldering pump tip - Weller, replacement for 7874B
Restore the performance of your desoldering pump by replacing the tip. Replacement for S-T7874B.
$6.12
Save 11%
Originally: $6.88
S-TPH60 Soldering iron stand - Weller, for WP35
Stand for weller soldering iron part number S-TWP35.
$37.11
Save 11%
Originally: $41.70
S-TPTA7 Soldering iron tip - Weller, screwdriver, for WTCPT, 700F
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP
  • PT Series Screwdriver Tip for TC201 Series Iron
  • Solid copper, plated with iron all over
  • Designed to provide maximum heat transfer from the heater to the tip
  • Tinned with lead-free solder
  • Use only genuine Weller tips
$4.54
Save 11%
Originally: $5.10
S-CRSF-R80-X Soldering Flux - Caig, Deoxit, Rosin Flux
Low residue, no-spill. Thermal stability enabling excellent wetting and reduced carbonization at soldering temperature. No-clean flux can be removed by wiping with a cloth or with cleaning solvent. Nonflammable and non corrosive. Recommended for electrical and electronic soldering applications.
Starting at $6.36
Save 11%
Originally: $7.15
S-T9000X Solder - Kester, 60 / 40, 44 Flux, 1 lb spool
60/40 Rosin Core, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.
$28.44
Save 11%
Originally: $31.95
S-Z150 Digital Capacitance Meter - YF-150
Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc.
  • 0.1 pf to 20,000 μF, 9 ranges
  • Over range indicator
  • 0.5% basic accuracy
  • Tilt stand
  • 3-1/2 digit LCD, 1" h x 2-¼" w
  • 1.5" x 2.8" x 6"
  • Zero adjustment
  • Input protected
  • Low battery indicator
  • Includes case, leads, battery, spare fuse and instructions
$38.23
Save 11%
Originally: $42.95
S-T7874B Desoldering Pump - Weller, manual
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning.
This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.
$25.77
Save 11%
Originally: $28.95
S-TST7 Soldering iron tip - Weller, conical, for WLC100 / WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST7 - .031" / 0.79 mm diameter Conical tip
  • Tinned with Lead Free alloy
$4.41
Save 11%
Originally: $4.95
S-TST3 Soldering iron tip - Weller, screwdriver ⅛", for WLC100 / WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST3 - .125" / 3.17 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$4.90
Save 11%
Originally: $5.50
S-TST1 Soldering iron tip - Weller, screwdriver ~\frac{1}{16}~", for WLC100 / WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST1 - .062" / 1.58 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$3.78
Save 11%
Originally: $4.25
S-Z3220 Digital Multimeter - YF-3220
Ergonomically designed. Uses one 9V battery, included.
  • 0.5% basic DC accuracy
  • audible continuity test
  • 3 1/2 digit LCD, 0.625" high
  • 10M ohm input resistance
  • 1.5" x 3" x 7.5"(w/o rubber case)
  • overload protection
  • voltage to 1000VDC, 750VAC
  • capacitance to 20 microfarads
  • polarity indicator
  • frequency to 10MHz
  • over range indicator
  • 10A (AC or DC)
  • low battery indicator
  • hFE and diode test
  • tilt stand and case
$40.01
Save 11%
Originally: $44.95
S-T7805 Bulb solder-off - Weller
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning.
Begin by squeezing, then hold over the solder to be removed and release the bulb to allow the solder to be sucked into the bulb. This method of solder removal is very basic and inexpensive. The bulb takes up very little space in your tool kit. Made in Taiwan.
$16.87
Save 11%
Originally: $18.95
S-TSP40L Soldering Iron - Weller, Marksman, 40 watts
  • Weller Consumer Soldering Irons with 3 LEDs
  • Three LED lights for limited application shadowing
  • Round Co-molded soft grip handle design for easy tip positioning
  • Triangular handle area for maximum tip control
  • Stainless steel heater construction
  • Excellent quality consumer iron
  • Input Voltage: 120
  • Power Consumption: 40 watts
  • Tip Temperature: 900ºF
  • Heating Element Type: Nichrome Wound
  • Fiberglass and ceramic insulated
$22.47
Save 11%
Originally: $25.25
S-TWLC100 Solder station - Weller, WLC100
40 Watts Soldering Station for Hobbyist and DIYer
  • Input Voltage: 120
  • Output Voltage: 120
  • Power Consumption: 5 - 40 watts
  • Temperature Range: 900ºF max
  • On/Off switch with "power-on" indicator light
  • Variable control produces 5 to 40 watts
  • Natural sponge tip cleaning pad
  • Ideal for hobbyist, DIYers and students
  • Includes 1/8" screwdriver tip
  • UL listed
$53.36
Save 11%
Originally: $59.95
S-TWP35 Soldering iron - Weller, WP35, controlled output
  • Input Voltage: 120
  • Power Consumption: 35 watts
  • Tip Temperature: 850ºF
  • Heating Element Type: Nichrome wound, fiberglass and ceramic insulated
  • Lightweight handle with cushion grip for ease of use and comfort
  • Comes with 1/8" screwdriver tip
  • Stand (S-TPH60) sold separately
  • Three wire grounded power cord for your safety
  • UL listed
Stand sold separately (S-TPH60)
$56.03
Save 11%
Originally: $62.95
S-Z370 Analog Multimeter - Volt-Ohm-Millimeter
Functions
  • Interior magnetic version to prevent interference from exterior magnetic field
  • Wide test range and high sensitivity
  • Transistor hFE test function
  • Overload protection diode & 0.5A (5Ø x 20mm) Fuse 1pc
$15.09
Save 11%
Originally: $16.95
S-T9000-LFX Solder - Kester 48, .031", Flux 66, Lead-free 1 lb Spool
Lead free solder, Sn96.5Ag3.0Cu0.5, 031" diameter, rosin flux, core 66. Kester SAC305 48 Activated Rosin Flux for cored solder wire was developed for lead-free applications to enable soldering of most common metals.
Starting at $71.20
Save 11%
Originally: $80.00
S-TPSI10 Soldering Iron Tip - Weller, for PSI100, Hot Knife tip
Replacement hot knife tip (cat no. PSI 10) for Weller Portasol, butane soldering iron.
Cut and cauterize nylon ropes and synthetic upholstery materials easily. Adjustable temperatures up to 450°C (850°F) make it perfect for cutting and shaping plastics and model making.
$12.42
Save 11%
Originally: $13.95
S-T9005 Solder - Kester 63 / 37, 1 lb spool, 0.031" diameter
(63/37 Rosin Core) - ..031" Diameter, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.
$28.44
Save 11%
Originally: $31.95
S-TSPG80L Soldering Iron - Weller SPG80L, 80 watts
The Weller SPG80L is a heavy duty 80 Watt soldering iron. It is ideal for soldering chassis connections in classic amps such as can capacitors and can be used in many other applications. This soldering iron has an indicator light that shows when the iron is turned on for safe use. The barrel is stainless steel and the rugged tip is replaceable. The impact resistant handle remains cool when in use. Features:
  • 900°F tip temperature suitable for chassis soldering and other heavy duty applications
  • Indicator light to show when the iron is on
  • 3/8” chisel tip
  • 6 foot power cord
  • Metal stand included
$37.34
Save 11%
Originally: $41.95
Don't see what you're looking for? Send us your product suggestions!