Circuit Design

S-H11X Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.50
S-HTUR-AX Turrets - mounting, for use on 2mm boards
Package of 10
Colors Available:
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-BX
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
Starting at $1.88
S-HEYE-A Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
$0.80
S-HTUR-BX Turrets - mounting, for use on 3mm boards
Package of 10
Colors Available:
Turrets for use on boards measuring 3mm thick, such as P-HTUR-C or P-HTUR-B. For 2mm boards, see S-HTUR-AX
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
Starting at $1.88
P-0602H Terminal Strip - 6 Lug, 1st & 6th Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.
$5.95
S-HTUR-P Turrets - 0.172" Long, Brass, Premium, Package of 10
Package of 10
Hollow Turret Terminal,Brass, .172" Long, Premium.
  • Finish/Plating: Tin
  • For Panel Thickness: .125 [3.2]
  • Material: Brass
  • Mounting Hole: 0.116
  • Terminal Length: 0.312
  • Terminal Style: Tubular Turret
  • Type: Solder Turret Terminal
  • Package of 10
$4.50
P-HFIBER-A Fiberboard - Vulcanized, 3" x 15", .062" Thick
Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.
  • .062" thick
  • 3" x 15"
$2.45
S-T1715 Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
S-T1717 Tool - Anvil for Turret Terminals, .750 L
Turret anvil for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For staking tool see S-T1715
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$10.95
P-ECB-244 Battery Box - Dunlop, snap-in enclosure
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$1.95
P-ECB-9V1A Battery Box - Gotoh, single, 9 volt
Single 9 volt battery box. See P-ECB-9V1B for single battery box with removable adapter. See P-ECB-9V2 for double battery box.
$13.95
On Backorder
P-HTAG-56 Tagboard - 300mm x 56mm, 2 x 28 Tags
300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.
$9.95
S-HEYE-B Eyelets - Plated Brass, Small, .089” x .125” x .150”
Package of 10
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.80
P-ECB-9V2 Battery Box - Gotoh, Dual, for 9 volt batteries
Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries. Four wood screws included. Directions: 1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24") 2. Put the box in guitar body and fix it by screws.
$19.00
P-HTAG-40 Tagboard - 40 Turret Pins, High Quality
200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.
$9.82
P-ECB-9V1B Battery Box - Gotoh, single, 9 volt, with removable adapter
Single 9 volt battery box. See P-ECB-9V1A for single battery box without removable adapter. See P-ECB-9V2 for double battery box.
$13.95
P-HTAG-16 Tagboard - 300mm x 16mm, 26 Tags, single row
300mm x 16mm tagboard with a single row of 26 tags. Each connector features two lugs for easy wiring. This board can be used for stand alone projects or can be used to expand the P-HTAG-56. This board features four mounting holes.
$5.25
P-0201H Terminal Strip - 2 Lug, 2nd Lug Common, Horizontal
Package of 5
Standard size terminal strip, 1/16" thick bakelite, tin plated steel lugs and brackets on 3/8" centers.
$3.45
P-0300V Terminal Strip - 3 Lug, 0 Common, Vertical
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers. Vertical mount.
$4.25
P-0301H Terminal Strip - 3 Lug, 2nd Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$3.75
P-0401H Terminal Strip - 4 Lug, 2nd Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$4.25
P-0500H Terminal Strip - 5 Lug, 0 Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.
$4.50
P-0501H Terminal Strip - 5 Lug, 3rd Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$4.75
P-0600H Terminal Strip - 6 Lug, 0 Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.
$5.00
Don't see what you're looking for? Send us your product suggestions!