Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-AUX-400 Capacitor - Auricap, 400V, Film
Sonically transparent high resolution film capacitor.
Starting at $10.95
C-CX-500 Capacitor - 500V, Ceramic Disc, ± 10%
Radial ceramic capacitor.
  • Voltage rating: 500VDC
  • Tolerance: ± 10%
$0.25
C-D-100V Capacitor - 100V, Ceramic Disc, ± 10%
± 10% tolerance.
Starting at $0.20
Partially Out of Stock
C-D-2000V Capacitor - 2000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.
Starting at $0.30
C-D-3000V Capacitor - 3000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 3kV, ± 10% tolerance.
Starting at $0.40
C-D-6000V Capacitor - 6000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.55
C-D680-50 Capacitor - 50V, 680pF, Ceramic Disc
Ceramic disc capacitor, 680 pF (.00068µF) rated for up to 50 V.
Non linear temperature coefficient of capacitance
$0.55
C-EC100-100-500 Capacitor - CE Mfg., 500V, 100/100µF
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 3/8"D X 4"H
$40.90
C-EC100-385 Capacitor - JJ Electronics, 385V, 100µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications.
  • Rated Capacitance: 100 µF
  • Rated Voltage: 385 V
  • max. tanδ at 100Hz, 20° C: 0,15
  • Iac: 450 mA
$7.35
C-EC100-40-450 Capacitor - CE Mfg., 450V, 100/40µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
100/40µF 450VDC
FP / Twist Lock Style. Solder Tabs.
-10%, +50% Tolerance, 85°C Temperature Rating.
$40.90
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can.
  • Rated Capacitance: 100+100 µF
  • Rated Voltage: 500 V
  • max. tanδ at 100Hz, 20° C: 0,20
  • Iac: 410+410 mA
$11.50
C-EC1015X3-450 Capacitor - CE Mfg., 450V, 15/15/15/10µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 15/15/15/10 µF 450VDC
  • -FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.
  • -1 ⅜"D X 2 ½"H.
$39.95
C-EC1020X3-450 Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$30.50
C-EC10X4-450 Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$31.45
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$8.25
C-EC20-10-10-10 Capacitor - CE Mfg., 450V, 20/10/10/10µF
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 ½"H.

*C-EC20-10-10-10 does contain all four values.
$38.80
C-EC2010X2-475 Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 55° temperature rating
  • 1-3/8" diameter x 3" tall
$36.70
C-EC20X3-450 Capacitor - CE Mfg., 450V, 20/20/20µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. 3 sections 20µF at 450VDC. 85°C temp rating.
$37.75
C-EC20X3-525 Capacitor - CE Mfg., 525V, 20/20/20µF
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.80
C-EC20X4-475 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic

  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.


All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70
C-EC20X4-475-2D5 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic, 2.5" Height
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic
  • FP / Twist Lock Style. Solder Lugs
  • -10%, +50% Tolerance, 65°C Temperature Rating
  • 1⅜"D X 2.5"H
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70
C-EC220-385 Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
  • Rated Capacitance: 220 µF
  • Rated Voltage: 385 V
  • max. tanδ at 100Hz, 20° C: 0,15
  • Iac: 650 mA
$7.95
C-EC250-500 Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications.
  • Rated Capacitance: 250 µF
  • Rated Voltage: 500 V
  • max. tanδ at 100Hz, 20° C: 0,25
  • Iac: 650 mA
$12.95
C-EC30-20X3-525 Capacitor - CE Mfg., 525V, 30/20/20/20uF
  • CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3 ½"H.
$40.90
Don't see what you're looking for? Send us your product suggestions!