Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-ZBD-500 Capacitor - SoZo, 500V, NexGen Blue Molded Vintage
The BlueMolded line of polyester film capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders®. These capacitors amazingly capture vintage Fender® tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era which is so musical and good, Marshall™ modeled their amps after them! After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers.
Starting at $4.41
Save 11%
Originally: $4.95
C-ZYD68-200 Capacitor - SoZo, 200V, .68 µF, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
$7.97
Save 11%
Originally: $8.95
C-G-100 Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads
Starting at $1.47
Save 11%
Originally: $1.65
C-ZYD-500 Capacitor - SoZo, 500V, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
Starting at $3.52
Save 11%
Originally: $3.95
C-S-600 Capacitors - Orange Drop, 600V, Polyester
Rated for 85°C operation. Polyester film capacitor with radial leads. ± 10% tolerance. Features a long history of proven reliability, a low dissipation factor, excellent stability, and a virtually linear temperature coefficient.
Starting at $0.67
Save 11%
Originally: $0.75
C-M Capacitor - Mallory, 630V, 150s, Axial Lead
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.
Starting at $0.72
Save 11%
Originally: $0.81
C-ECX-XFT Capacitor - F&T, Multi-Section, Electrolytic
Made in Germany. 1-⅜" x 2". Clamp required. Similar to LCR.
Starting at $8.86
Save 11%
Originally: $9.95
C-EC40X4-350 Capacitor - CE Mfg., 350V, 40/40/40/40 μF
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 40/40/40/40 uF @ 350 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 85°C Temperature Rating. 1-3/8" dia. x 2-½" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.40
Save 11%
Originally: $40.90
C-T-630V Capacitor - 630V, Metal Film, Tubular
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 630 Volts.
Starting at $0.39
Save 11%
Originally: $0.44
C-EC32-32-500CE Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.
$6.68
Save 11%
Originally: $7.50
C-EC50-50-500CE Capacitor - 500V, ~\frac{50}{50}~ μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.
$7.34
Save 11%
Originally: $8.25
S-H128 Capacitor Clamp - 1.5" Diameter
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut.
1-½" diameter.
$1.74
Save 11%
Originally: $1.95
C-EC47-385 Capacitor - JJ Electronics, 385V, 47µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$5.30
Save 11%
Originally: $5.95
C-EC500-500 Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$15.09
Save 11%
Originally: $16.95
S-H122 Capacitor Clamp - 1.375" Diameter
For mounting multi-section can capacitors in your vintage amp.
$1.56
Save 11%
Originally: $1.75
C-T-400V Capacitor - 400V, Metal Film, ± 10%
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 400 Volts.
Starting at $0.36
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$7.97
Save 11%
Originally: $8.95
C-EC20X4-475 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$32.66
Save 11%
Originally: $36.70
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$13.97
Save 11%
Originally: $15.70
C-EC40X3-525 Capacitor - CE Mfg., 525 V, 40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.40
Save 11%
Originally: $40.90
C-EC30-30-30-10 Capacitor - CE Mfg., 475V, 30/30/30/10µF, Electrolytic
Capacitor - Electrolytic, 30/30/30/10 µF @ 475 VDC Drop-In replacement for Leslie 4 section 30uF/30uF/30uF/10uF @ 475V For use in Leslie 122, 147, many others. CE Manufacturing capacitors are hand made in the USA using original Mallory Equipment. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$34.53
Save 11%
Originally: $38.80
C-EC40-20X3-525 Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.40
Save 11%
Originally: $40.90
C-EC4020X2-525 Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$36.40
Save 11%
Originally: $40.90
C-EC40-20-20 Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$34.53
Save 11%
Originally: $38.80
Don't see what you're looking for? Send us your product suggestions!