1. Home
  2. Products
  3. Capacitors

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.
products per page
C-EC120-100-100-100 Capacitor - CE Mfg., 350 V, 120/100/100/100 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. Similar to Mallory FP417.26.
  • 120/100/100/100uF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC60-40-40-40 Capacitor - CE Mfg., 400 V, 60/40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/40/40/40uF 400VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
C-EC2010X2-475 Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 65° temperature rating
  • 1-3/8" diameter x 3" tall
$36.70
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.95
C-EC30-20-475 Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.70
C-EC4030X2-450 Capacitor - CE Mfg., 450V, 40/40/30/30µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/30/30 uF 450VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H
$40.90
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.95
C-EC30-30-500 Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.70
C-EC1020X3-450 Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$30.50
C-EC40-40-30 Capacitor - CE Mfg., 40µF/450V, 40µF/400V, 30µF/350V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40uF@450V, 40uF@400V, 30uF@350V.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$40.90
C-EC30X2-20-525 Capacitor - CE Mfg., 525V, 30/30/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$39.95
C-EC100-100-500 Capacitor - CE Mfg., 500V, 100/100µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$40.90
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.50
C-EC40X3-525 Capacitor - CE Mfg., 525 V, 40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
C-EC20-10-10-10 Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 1/2"H.

*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$38.80
C-EC40X4-450 Capacitor - CE Mfg., 450V, 40/40/40/40µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to Mallory specs using original Mallory machinery. 85°C temperature rating.
$38.80
C-EC50-30-30-10 Capacitor - CE Mfg., 50µF@300V, 30µF@25V x2, 10µF@350V
Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.
$40.90
C-EC20X4-475 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the can capacitor in the Princeton AA964, Princeton AB1270, Princeton Reverb AA1164, Princeton Reverb AA760 and Princeton Reverb AB1270.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70
C-EC70-40X2-450 Capacitor - CE Mfg., 450V, 70/40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 70/40/40µF 450VDC
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$40.90
C-EC50-50-500CE Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.
$8.95
C-EC30-20X3-525 Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.90
C-EC1015X3-450 Capacitor - CE Mfg., 450V, 15/15/15/10µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 15/15/15/10 µF 450VDC
  • -FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.
  • -1 ⅜"D X 2 ½"H.
$39.95
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor.
Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$13.50
C-EC30X3-525 Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.
$38.80
Don't see what you're looking for? Send us your product suggestions!