1. Home
  2. Products
  3. Capacitors

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
products per page
C-JP-BBX-400 Capacitor - Jupiter, Bumblebee, Paper in Oil, 400V, Axial Lead
Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.
  • Voltage: 400VDC
  • Dielectric: Paper in Mineral Oil
  • Tolerance: +/- 10% Operating
  • Temperature: 85°C
  • Leads: 20awg Tinned OFC Copper
  • RoHS Compliant
  • Made in USA
$24.00
C-JP-RAX Capacitor - Jupiter, Red Astron Capacitors, Tin Foil, Axial Lead
Modeled after the legendary capacitors, the Jupiter Red Astron capacitors have a similar style to the vintage capacitors to give a very authentic tone and look, yet with high reliability and longevity. This phenolic case potted tin foil and mylar capacitor yields a uniquely vintage tone perfect for guitar amplifiers and vintage audio amplifiers alike.
  • Construction: Polyester/Tin Foil
  • Case: Potted Phenolic Paper
  • Tolerance: +/-10%
  • Operating temperature: -55C – 85C, derate 50% at 125C.
  • Leads: 20AWG Tinned Copper
  • Application: Guitar Amplifier, Guitar Tone Control, Vintage Audio Amplifier
  • Made in the USA of US-made materials.
Starting at $13.25
C-JP-CX Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $3.49
C-R82-X Capacitor - Kemet, R82 Series, Polyester, 5mm Spacing
High quality R82 Series box film capacitors from Kemet. These polyester film capacitors have 5mm lead spacing, a minimum voltage rating of 63VDC, and a tolerance of ±10% or better. The small size, high specifications, and radial mounting makes them an excellent choice for PCB builds of pedals, synthesizer, and other audio equipment. The R82 Series is constructed of metallized polyester film with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94V–0 requirements.
  • Voltage rating: 63 VDC Minimum
  • Lead Spacing: 5 mm
  • Capacitance tolerance: ±10% or better
  • Operating temperature range of -55˚C to +105˚C
  • RoHS compliance and lead-free terminations
  • Self-healing
Starting at $0.20
C-M Capacitor - Mallory, 630V, 150s, Axial Lead
Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.
Starting at $0.99
C-M-400 Capacitor - Mallory, 400V, 150s, Axial Lead
Mallory axial capacitors rated for 400V. The available values are smaller in size than the 630V versions for builds where less space is available. These are also a great choice for use as guitar tone capacitors over the larger 630V versions. The Type 150 series axial lead metallized polyester non inductive capacitors are available in bulk or on tape and reel for automatic insertion. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
$1.25
C-EC120-100-100-100 Capacitor - CE Mfg., 350 V, 120/100/100/100 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. Similar to Mallory FP417.26.
  • 120/100/100/100uF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜" D X 3.5" H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-MCS-100 Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
$34.95
C-EC100X3-200 Capacitor - CE Mfg., 200V, 100/100/100µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$13.50
C-ET100-25-IL Capacitor - Illinois, 25V, 100µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%
$0.65
On Backorder
C-EC32-32-500 Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.95
C-D-6000V Capacitor - 6000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.55
C-ET220-300-FT Capacitor - F&T, 300V, 220µF, Electrolytic
Electrolytic F&T axial lead electrolytic capacitor
  • 220 uF/ 300V
  • .98" diameter x 1.96" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$7.50
C-EC30X3-10-525 Capacitor - CE Mfg., 525V, 30/30/30/10uF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
C-PFD1-50-R Capacitor - 50 V, 0.1 µF, Polyester
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.05
C-EC100X3-20-200 Capacitor - CE Mfg., 200V, 100/100/100/20µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - 100/100/100/20µF at 200V
  • -10%, +50% tolerance
  • 85° temperature rating
  • 1-3/8" dia. x 3" tall
$38.95
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$15.50
C-EC10X4-450 Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$31.45
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.95
C-T-400V Capacitor - 400V, Metal Film, ± 10%
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 400 Volts.
Starting at $0.60
C-ET25-25 Capacitor - 25V, 25µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Measures .52" in length x .25" in diameter
$0.25
C-EC40X4-525-PC Capacitor - CE, 40/40/40/40µF, 525VDC, Electrolytic, PC Mount
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40/40uF 525VDC.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-⅜" Dia. X 3-½" H.
$40.90
C-RD47-400 Capacitor - 400V, .47µF, Polypropylene Film
Rated for 85°C operation. Polypropylene film capacitor with radial leads. ± 5% tolerance.
.90" diameter x 1.55" length.
$2.65
Don't see what you're looking for? Send us your product suggestions!