Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-M-400 Capacitor - Mallory, 400V, 150s, Axial Lead
Mallory axial capacitors rated for 400V. The available values are smaller in size than the 630V versions for builds where less space is available. These are also a great choice for use as guitar tone capacitors over the larger 630V versions. The Type 150 series axial lead metallized polyester non inductive capacitors are available in bulk or on tape and reel for automatic insertion. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
$1.25
C-M Capacitor - Mallory, 630V, 150s, Axial Lead
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.
Starting at $0.87
C-ET220-300-IL Capacitor - Illinois, 300V, 220µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height
$6.95
C-ET16-475 Capacitor - 475V, Axial Lead Electrolytic, Capacitance: 16 uF
  • 16µF, 475VDC
  • Rated for -25° C through +85° C
  • Tolerance ± 20%
  • Ripple current rated at 90mA rms at 120 Hz 105° C
  • Measures 26mm in length x 13mm in diameter.
$1.95
C-T-630V Capacitor - 630V, Metal Film, Tubular
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 630 Volts.
Starting at $0.44
C-ET33-160-FT Capacitor - F&T, 160V, 33µF, Axial Lead Electrolytic
.47" diameter x 1.15" height. Operating temperature range -40°C to 85°C.
Axial lead electrolytic. Made in Germany.
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$1.95
C-SA Capacitor - Sprague Atom, Aluminum Electrolytic
Aluminum Capacitors +85 °C, axial lead. The best electrolytic money can buy. Features:
  • Low leakage current
  • Long shelf life
  • Ideal for application in TV sets, auto radios, radio-phone combinations, electronic testing equipment
Starting at $2.69
C-U-630V Capacitor - 630V, Polypropylene, axial leads
± 10% tolerance. Rated to 105°C. Non-inductive, polypropylene film axial lead capacitor with self healing windings. Made by Illinois Capacitor.
Starting at $0.79
C-ET47-35 Capacitor - 35V, 47µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Size .63" dia. x 1" length.
$0.75
C-EM25-25-25 Capacitor - F&T, 25V, 25/25µF, Electrolytic
Made in Germany. 1" diameter x 2" length. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$9.95
C-ET100-25-IL Capacitor - Illinois, 25V, 100µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%
$0.65
C-ET-350 Capacitor - 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $0.98
C-EM8-8-450 Capacitor - F&T, 450V, 8/8µF, Axial Lead Electrolytic
Made in Germany. 1" diameter x 1.5" length. Used in Vox AC30 Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$7.95
C-ET16-16-500FT Capacitor - F&T, 500V, 16/16µF, Axial Lead Electrolytic
Axial lead two section electrolytic 16/16µF, 500V. Made in Germany. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$7.95
C-ETX-450-FT Capacitor - F&T, 450V, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor. Operating temperature range -40°C to 85°C. Made in Germany
Starting at $6.95
C-ETX-350-IL Capacitor - Illinois, 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $1.65
C-FVD05-150 Capacitor - Fender, .05 µF at 150V, Vintage '50s, Mylar & Tin
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including the American Vintage series of guitars and basses.
$25.95
C-FS-1000 Capacitor - Solen, 1000V, "Fast", Metalized Polypropylene
Made of the highest quality aluminum metalized polypropylene film available.Made in France.
Starting at $3.65
C-ETX-500-IL Capacitor - Illinois, 500V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $4.25
C-ZBD-500 Capacitor - SoZo, 500V, NexGen Blue Molded Vintage
The BlueMolded line of polyester film capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders®. These capacitors amazingly capture vintage Fender® tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era which is so musical and good, Marshall™ modeled their amps after them! After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers.
Starting at $4.95
C-FT-250 Capacitor - Solen, 250V, "Fast", Metalized Polypropylene
Made of the highest quality aluminum metalized polypropylene film available. Made in France. This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved.
Starting at $3.09
C-ET100-350-FT Capacitor - F&T, 350V, 100µF, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor
  • 100 uF/ 350V
  • .98" diameter x 1.47" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$7.50
C-ZYD68-200 Capacitor - SoZo, 200V, .68 µF, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
$8.95
C-PV4700-55-A Capacitor - Peavey, 55V, 4700µF, Axial Lead
Peavey 4700 µF @ 55V polarized electrolytic capacitor with axial leads. 7/8" diameter x 2" length.
$6.95
Don't see what you're looking for? Send us your product suggestions!