Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-EC80-40-40 Capacitor - CE Mfg., 450V, 80/40/40µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/40/40uF - 450VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.70
C-EC80-80-20 Capacitor - CE Mfg., 450V, 80/80/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/80/20uF - Electrolytic, 450 V (80uF sections) / 400V (20uF section)
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.70
C-R82-X Capacitor - Kemet, R82 Series, Polyester, 5mm Spacing
High quality R82 Series box film capacitors from Kemet. These polyester film capacitors have 5mm lead spacing, a minimum voltage rating of 63VDC, and a tolerance of ±10% or better. The small size, high specifications, and radial mounting makes them an excellent choice for PCB builds of pedals, synthesizer, and other audio equipment. The R82 Series is constructed of metallized polyester film with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94V–0 requirements.
  • Voltage rating: 63 VDC Minimum
  • Lead Spacing: 5 mm
  • Capacitance tolerance: ±10% or better
  • Operating temperature range of -55˚C to +105˚C
  • RoHS compliance and lead-free terminations
  • Self-healing
Starting at $0.20
C-JP-CX Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $3.49
C-JP-BBX-400 Capacitor - Jupiter, Bumblebee, Paper in Oil, 400V, Axial Lead
Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.
  • Voltage: 400VDC
  • Dielectric: Paper in Mineral Oil
  • Tolerance: +/- 10% Operating
  • Temperature: 85°C
  • Leads: 20awg Tinned OFC Copper
  • RoHS Compliant
  • Made in USA
$24.00
C-JP-RAX Capacitor - Jupiter, Red Astron Capacitors, Tin Foil, Axial Lead
Modeled after the legendary capacitors, the Jupiter Red Astron capacitors have a similar style to the vintage capacitors to give a very authentic tone and look, yet with high reliability and longevity. This phenolic case potted tin foil and mylar capacitor yields a uniquely vintage tone perfect for guitar amplifiers and vintage audio amplifiers alike.
  • Construction: Polyester/Tin Foil
  • Case: Potted Phenolic Paper
  • Tolerance: +/-10%
  • Operating temperature: -55C – 85C, derate 50% at 125C.
  • Leads: 20AWG Tinned Copper
  • Application: Guitar Amplifier, Guitar Tone Control, Vintage Audio Amplifier
  • Made in the USA of US-made materials.
Starting at $13.25
C-MCS-100 Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
$34.95
C-ETRX-160 Capacitor - 160V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 160VDC.
Starting at $0.59
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$13.50
C-ET100-25-IL Capacitor - Illinois, 25V, 100µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%
$0.65
On Backorder
C-EC32-32-500 Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.95
C-D-6000V Capacitor - 6000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.55
C-ET220-300-FT Capacitor - F&T, 300V, 220µF, Electrolytic
Electrolytic F&T axial lead electrolytic capacitor
  • 220 uF/ 300V
  • .98" diameter x 1.96" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$7.50
C-ZYD68-200 Capacitor - SoZo, 200V, .68 µF, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
$11.40
C-PFD1-50-R Capacitor - 50 V, 0.1 µF, Polyester
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.05
C-EC80-50-20-20-350 Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$15.50
C-EC1020X3-450 Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$30.50
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.95
C-T-400V Capacitor - 400V, Metal Film, ± 10%
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 400 Volts.
Starting at $0.60
C-ET25-25 Capacitor - 25V, 25µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Measures .52" in length x .25" in diameter
$0.25
C-G-100 Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads
Starting at $1.95
C-RD47-400 Capacitor - 400V, .47µF, Polypropylene Film
Rated for 85°C operation. Polypropylene film capacitor with radial leads. ± 5% tolerance.
.90" diameter x 1.55" length.
$2.65
C-ETX-50-IL Capacitor - Illinois, 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Axial leads. Rated for 50V max.
Starting at $0.55
Don't see what you're looking for? Send us your product suggestions!