Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 47/47/47uF 350VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 2.6"H.
$40.90

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 25/50/150uF 150VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 3"H.
$36.70

High quality axial capacitors rated at 400V. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features
- Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
- Non polar
- Tubular metalized polyester film construction
- ±10% tolerance
- Axial leads
- Operational life greater than 300,000 hours (40 °C/0.5 UR)
Starting at $1.00

High quality axial-leaded electrolytic capacitors. These 021 ASM series capacitors are produced by Vishay BC, formerly known as Philips / BC. These capacitors have been produced for many years and can be found in a wide variety of music equipment ranging from from vintage amps by Vox and Marshall to classic fuzz pedals such as the Fuzz Face and Tonebender. Suggested applications include general purpose use, industrial, automotive, audio-video, coupling, decoupling, smoothing, filtering, buffering, portable and mobile equipment. Features
- Long useful life: 2500 h to 8000 h at 85 °C
- Miniaturized, high CV-product per unit volume
- Charge and discharge proof
- Polarized aluminum electrolytic capacitors, non-solid electrolyte
- Axial leads, cylindrical aluminum case, insulated with a blue sleeve
Starting at $1.70

Modeled after the legendary capacitors, the Jupiter Red Astron capacitors have a similar style to the vintage capacitors to give a very authentic tone and look, yet with high reliability and longevity. This phenolic case potted tin foil and mylar capacitor yields a uniquely vintage tone perfect for guitar amplifiers and vintage audio amplifiers alike.
- Construction: Polyester/Tin Foil
- Case: Potted Phenolic Paper
- Tolerance: +/-10%
- Operating temperature: -55C – 85C, derate 50% at 125C.
- Leads: 20AWG Tinned Copper
- Application: Guitar Amplifier, Guitar Tone Control, Vintage Audio Amplifier
- Made in the USA of US-made materials.
Starting at $11.25

Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil. The 50V series are in smaller packages that are perfect for guitars, effects and more.
- Casing: Hermetically sealed aluminum
- Dielectric: Mineral oil
- Lead Diameter: 20AWG
- Termination Style: Axial
- Tolerance: ±10%
- Values: .001 μF - .047 μF
- Voltage Rating: 50V
Starting at $3.95

USA made CE Manufacturing multi section electrolytic can capacitor. The four sections are - 20uF at 450VDC, 100uF at 50VDC, 100uF at 50VDC, and 20uF at 450VDC. Manufactured to Mallory specs on original Mallory machinery.
- [email protected] x2,[email protected] x 2 Electrolytic
- FP / Twist Lock Style. Solder Tabs
- -10%, +50% Tolerance, 85°C Temperature Rating
- 1 ⅜"D X 2 ½"H
$36.70

Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
$28.95
Save 17%
Originally: $34.95

Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$13.95

Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.
$5.40

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$9.95

100 V ceramic disc capacitors. ± 10% tolerance.
Starting at $0.25

Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.
- Voltage: 400VDC
- Dielectric: Paper in Mineral Oil
- Tolerance: +/- 10% Operating
- Temperature: 85°C
- Leads: 20awg Tinned OFC Copper
- RoHS Compliant
- Made in USA
$26.99

Electrolytic F&T axial lead electrolytic capacitor
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
- 220 uF/ 300V
- .98" diameter x 1.96" length
- Operating temperature range -40°C to 85°C
- Made in Germany
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$8.35

CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90

Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.10

Made in the USA on Mallory's original machinery.
- 4 sections - 100/100/100/20µF at 200V
- -10%, +50% tolerance
- 85° temperature rating
- 1-3/8" dia. x 3" tall
$38.95

1 3/8" diameter x 3 1/2" height. Similar to LCR
$17.45

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 10/10/10/10uF 450VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
$31.45

JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.50

± 10% tolerance. Rated to 105°C. Non-inductive, polypropylene film axial lead capacitor with self healing windings. Made by Illinois Capacitor.
Starting at $0.79

High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Measures .52" in length x .25" in diameter
Tolerance -20%, +50%.
Measures .52" in length x .25" in diameter
$0.30

- CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 40/40/40/40uF 525VDC.
- FP / Twist Lock Style. PCB Mount.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1-⅜" Dia. X 3-½" H.
$40.90