Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
S-H121M Mounting Plate - Metal, for 1" Can Capacitor
Metal plate for mounting FP type can capacitors. Designed for use with three section, 1” capacitors.
$0.25
Save 83%
Originally: $1.50
S-H121 Insulator - 3 Section, for FP Cap, 1.5" Mounting Centers
Phenolic insulator for mounting FP type can capacitors.
$1.50
S-H122 Capacitor Clamp - 1.375" Diameter
For mounting multi-section can capacitors in your vintage amp.
$1.75
S-H120 Insulator - 4 Section, for FP Cap
Phenolic insulator for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$1.95
S-H120M Mounting Plate - Metal, for 1.375" Can Capacitor
Metal plate for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$1.95
On Backorder
S-H128 Capacitor Clamp - 1.5" Diameter
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut.
1-½" diameter.
$1.95
S-H123 Capacitor Clamp - 1" Diameter
Clamp for mounting electrolytic can capacitors in vertical position. Supplied with #6-32 screw and nut.
$2.17
C-EC47-385 Capacitor - JJ Electronics, 385V, 47µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$5.95
C-EC100-385 Capacitor - JJ Electronics, 385V, 100µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$7.35
C-EC32-32-500CE Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.
$7.50
C-EC220-385 Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$7.95
C-EM8-8-450 Capacitor - F&T, 450V, ~\frac{8}{8}~ µF, Axial Lead Electrolytic
Made in Germany. 1" diameter x 1.5" length. Used in Vox AC30 Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$7.95
C-EC50-50-500CE Capacitor - 500V, ~\frac{50}{50}~ μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.
$8.25
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$8.25
C-EC32-32-500 Capacitor - JJ Electronics, 500V, ~\frac{32}{32}~ μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.45
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$8.95
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.75
C-ECX-XFT Capacitor - F&T, Multi-Section, Electrolytic
Made in Germany. 1-⅜" x 2". Clamp required. Similar to LCR.
Starting at $9.95
C-EM25-25-25 Capacitor - F&T, 25V, 25/25µF, Electrolytic
Made in Germany. 1" diameter x 2" length. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$9.95
C-EM33-33-450 Capacitor - F&T, 450V, ~\frac{33}{33}~ µF, Electrolytic
Made in Germany. 1" diameter x 2" length. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$9.95
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$11.50
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor.
Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$12.50
C-EC250-500 Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$12.95
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$14.95
Don't see what you're looking for? Send us your product suggestions!