Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Orange Drop

Orange Drop capacitors have set the standard for "modern" capacitors in appearance and performance since the 1960's.

JJ Electronics

JJ vacuum tubes and capacitors are widely used in guitar and audio amplifiers, recording studio equipment and in a variety of applications for audiophiles.

CE Manufacturing

CE Manufacturing maintains manufacturing processes which have been in place for nearly 100 years. Can capacitors are created through hand-machined processes utilizing original vintage equipment paired with modern design and testing practices,
C-S-600 Capacitors - Orange Drop, 600V, Polyester
Rated for 85°C operation. Polyester film capacitor with radial leads. ± 10% tolerance. Features a long history of proven reliability, a low dissipation factor, excellent stability, and a virtually linear temperature coefficient.
Starting at $0.75
C-P-600V Capacitor - 600V, 716P Series, Polypropylene
High performance version of the popular 715P series. They are made from polypropylene film and foil with pure copper leads, making them ideal for high pulse current applications. Rated for 85 degrees celsius operation ± 5% tolerance. Straight radial leads, minimum 1.25" length.
Starting at $0.95
C-R-600 Capacitor - 600V, 715P Series, Polypropylene
Rated for 85°C operation. Polypropylene film capacitor with radial leads. ± 5% tolerance.
Starting at $1.09
C-P-400V Capacitor - 400V, 716P Series, Polypropylene
High performance version of the popular 715P series. They are made from polypropylene film and foil with pure copper leads, making them ideal for high pulse current applications. Rated for 85 degrees celsius operation ± 5% tolerance. Straight radial leads, minimum 1.25" length.
Starting at $1.10
C-S-1600 Capacitor - Orange Drop, 1600V, Polypropylene
Radial lead, polypropylene film capacitor. ± 10% tolerance. Features a long history of proven reliability, a low dissipation factor, excellent stability, and a virtually linear temperature coefficient.
Starting at $1.40
C-G-100 Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads
Starting at $1.65
C-RD47-400 Capacitor - 400V, .47µF, Polypropylene Film
Rated for 85°C operation. Polypropylene film capacitor with radial leads. ± 5% tolerance.
.90" diameter x 1.55" length.
$2.65
C-ET-500-JJ Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $4.95
C-EC47-385 Capacitor - JJ Electronics, 385V, 47µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$5.95
C-EC100-385 Capacitor - JJ Electronics, 385V, 100µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$7.35
C-EC220-385 Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$7.95
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$8.25
C-EC32-32-500 Capacitor - JJ Electronics, 500V, ~\frac{32}{32}~ μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.45
C-ET10-10 Capacitor - CE Mfg., Tubular, 450V, 10/10µF
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):
  • Orange to Black = 10 µF
$8.50
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$8.95
C-ER33-33-47 Capacitor - CE Mfg., 160V, 33/33/47 µF, Electrolytic
Electrolytic capacitor, three sections 33uf, 33uf, 47uf at 160VDC. Measures 1" (diameter) x 3.7" (length).
$8.95
C-ER33-47-160 Capacitor - CE Mfg., 160V, ~\frac{33}{47}~ µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47 µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
$8.95
C-ER47-80-160 Capacitor - CE Mfg., 160V, 47/80µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/80 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Orange, Black):
  • Red to Black = 47 µF
  • Orange to Black = 80 µF
$8.95
C-ER33-47-22 Capacitor - CE Mfg., 33µF@160V, 47µF@160V, 22µF@25V
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47 µF @ 160 VDC & 22 µF ±20% @ 25 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Orange, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
  • Orange to Black = 22 µF
$8.95
C-ER33-47-47 Capacitor - CE Mfg., 160V, 33/47/47 µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. 33/47/47 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Red, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
$8.95
C-ER47-47-160 Capacitor - CE Mfg., 160V, 47/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):
  • Red to Black = 47 µF
$8.95
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.75
On Backorder
C-ET16-800 Capacitor - CE Mfg., 800V (900V Surge), 16µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 16 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Blue, Black)
$10.95
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$11.50
Don't see what you're looking for? Send us your product suggestions!