Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-EC32-32-500CE Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$7.95
C-EC50-50-500CE Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$9.25
C-EC32-32-500 Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$9.95
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.95
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.95
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$14.95
On Backorder
C-EC250-500 Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.25
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$18.45
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$18.95
C-V365 Capacitor - 365pF, Variable, Single Section
Single section 365 pf variable capacitor, also referred to as a tuning capacitor. A compact, rugged, economical unit used in wide variety of low-voltage applications. This capacitor's almost cubical shape makes more efficient use of space and delivers a remarkable amount of capacitance for its volume.
$29.95
C-EC80-80-20 Capacitor - CE Mfg., 450V, 80/80/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/80/20uF - Electrolytic, 450 V (80uF sections) / 400V (20uF section)
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.95
C-EC40-15-10-25 Capacitor - CE Mfg., 40µF@450V, 15µF@450V, 10µF@450V, 25@25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 40µF@450V, 15µF@450V, 10µF@450V, 25@25
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 2.6"H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC20X2-100X2 Capacitor - CE Mfg., 20@450V x2, 100@50V x 2
USA made CE Manufacturing multi section electrolytic can capacitor. The four sections are - 20uF at 450VDC, 100uF at 50VDC, 100uF at 50VDC, and 20uF at 450VDC. Manufactured to Mallory specs on original Mallory machinery.
  • 20@450V x2,100@50V x 2 Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 85°C Temperature Rating
  • 1 ⅜"D X 2 ½"H
$36.95
C-EC1020X3-450 Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$36.95
C-EC40-20-20-10 Capacitor - CE Mfg., 475V, 40/20/20/10µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
  • 40/20/20/10uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC25-50-150 Capacitor - CE Mfg., 150V, 25/50/150μF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 25/50/150uF 150VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$36.95
C-EC20X4-475 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the can capacitor in the Princeton AA964, Princeton AB1270, Princeton Reverb AA1164, Princeton Reverb AA760 and Princeton Reverb AB1270.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC80-40-40 Capacitor - CE Mfg., 450V, 80/40/40µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/40/40uF - 450VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.95
C-EC30-20-475 Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.95
C-EC40-10-10-250 Capacitor - CE Mfg., 40µF@450V, 10µF@450V, 10µF@450V, 250@25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 40µF@450V, 10µF@450V, 10µF@450V, 250@25
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC150-80-80-50 Capacitor - CE Mfg., 250 V, 150/80/80/50 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 150/80/80/50 250VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE Manufacturing can capacitors have a two year warranty against manufacturer defects.
$36.95
C-EC60401025 Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
$36.95
Don't see what you're looking for? Send us your product suggestions!