Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 40/40/40/40uF 525VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1-⅜" Dia. X 3.6" H.
$40.90

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
- 40/20/20/10uF 475VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 65°C Temperature Rating.
- 1 ⅜"D X 2 ½"H.
- All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70

Made in the USA on Mallory's original machinery.
- 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
- -10%, +50% tolerance
- 65° temperature rating
- 1-3/8" diameter x 3" tall
$36.70

High quality 0.68uF axial capacitor rated at 250V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x26.5mm size works well for turret board builds of these classic amplifiers. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features
- Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
- Non polar
- Tubular metalized polyester film construction
- ±10% tolerance
- Axial leads
- Operational life greater than 300,000 hours (40 °C/0.5 UR)
$2.25

New old stock radial capacitors from Philips with 10mm lead spacing. The KT-347 series capacitors feature the same lacquer coating as the Mullard / Philips mustard caps found in classic Marshall amps and many vintage pedals. These NOS caps feature a low-inductive wound cell of metal foil and a polyethylene terephthalate film.
$2.25

Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.70

Metal plate for mounting FP type can capacitors. Designed for use with three section, 1” capacitors.
$0.25
Save 83%
Originally: $1.50

High quality radial capacitors rated at 100V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features
Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
- Polyester film dielectric
- Vacuum deposited aluminum electrodes
- Wound mono construction
- Flame retardant epoxy material (UL-class 94 V-0)
- Tinned wire radial leads
- Performance Grade 1 (long life)
- ±10% tolerance
- Rated 100VDC
Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
Starting at $1.15

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 10/10/10/10uF 450VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
$31.45

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
- Rated voltage: 16/16µF
- Operating temperature: -25°C - 70°C
- Rated voltage: 500VDC
- Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
- Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25
The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/30/30uF 525VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 3"H.
$38.80

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
- 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 3"H.
Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.80

JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.95

CE Manufacturing USA made multi section can capacitor. Reproduced to Mallory specs using original Mallory machinery. 85°C temperature rating.
$38.80

0.068uF Metal Film capacitor. ± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 250 Volts.
$0.50

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
All CE Manufacturing can capacitors have a two year warranty against manufacturer defects.
- 150/80/80/50 250VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 ⅜"D X 3"H.
All CE Manufacturing can capacitors have a two year warranty against manufacturer defects.
$36.70

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 25 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Red, Black)
$12.25

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
- 40/40/30/20uF 400VDC Electrolytic.
- FP / Twist Lock Style. Solder Lugs.
- -10%, +50% Tolerance, 65°C Temperature Rating.
- 1 3/8"D X 2.5"H.
Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90

CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 80/40/40/20 µF 525VDC
- PC Mount Tabs.
- -10%, +50% Tolerance
- 55°C Temperature Rating.
$44.05

This capacitor is used as a tuning capacitor in a variety of RF test equipment and ham radio gear. It's combination of low price, high maximum voltages, fairly large capacitances, and low-leakage L-4 grade ceramic have made it a popular configuration. Single section 100pf, screwdriver or knob adjustable, full rotation.
$32.20

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):
- Orange to Black = 10 µF
$8.50

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):
- Blue to Black = 33 µF
- Red to Black = 47 µF
$8.95

JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$9.95

CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/30/20uF 525VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 3"H.
$39.95