Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Package of 13
Replacement electrolytic capacitor set.Basic set includes:
- (3) C-ET22-500-FT
- (2) C-ET80-450-FT
- (1) C-ET25-50
- (7) C-ET25-25
- (3) C-SA20-500
- (2) C-SA80-450
- (1) C-SA25-50
- (7) C-SA25-25
Starting at $27.75

Made in the USA on Mallory's original machinery.
- 4 sections - 30µF all at 475V
- -10%, +50% tolerance
- 55° temperature rating
- 1-3/8" diameter x 2-5/8" tall
$37.75

Rated for 85°C operation. Polypropylene film capacitor with radial leads. ± 5% tolerance.
.90" diameter x 1.55" length.
.90" diameter x 1.55" length.
$2.65

Package of 5
Replacement electrolytic capacitor set.Basic set includes:
- (1) C-EC20X3-450
- (3) C-ET25-25
- (1) C-ET10-50
- (1) C-EC20X3-450 (CE Manufacturing)
- (3) C-SA25-25 (Sprague Atom)
- (1) C-SA10-25 (Sprague Atom)
Starting at $38.80

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):
- Red to Black = 47 µF
$8.95

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
- 40/40/30/20uF 400VDC Electrolytic.
- FP / Twist Lock Style. Solder Lugs.
- -10%, +50% Tolerance, 65°C Temperature Rating.
- 1 3/8"D X 2"H.
Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90

Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
$36.70

Peavey 4700 µF @ 55V polarized electrolytic capacitor with axial leads. 7/8" diameter x 2" length.
$6.95

Phenolic insulator for mounting FP type can capacitors.
$1.50

JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$7.95

- CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 40/40/40/40uF 525VDC.
- FP / Twist Lock Style. PCB Mount.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1-⅜" Dia. X 3-½" H.
$40.90

Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.55

Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.
$40.90

Package of 8
Replacement electrolytic capacitor set.Basic set includes:
- (1) C-EC20X4-475
- (1) C-ET25-50
- (6) C-ET25-25
- (1) C-EC20X4-475 (CE Manufacturing)
- (1) C-SA25-50 (Sprague Atom)
- (6) C-SA25-25 (Sprague Atom)
Starting at $38.45

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.
$7.50

JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.75

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
- 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
- FP / Twist lock style, Solder tabs.
- -10%, +50% Tolerance
- 85°C temperature rating.
- 1 3/8"D X 2 1/2"H.
*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$38.80

Package of 4
Replacement electrolytic capacitor set.Basic set includes closest generic values:
- (1) C-ET22-450
- (2) C-ET10-450
- (1) C-ET25-25
Premium set includes:
- (1) C-SA16-475 (Sprague Atom)
- (2) C-SA8-450 (Sprague Atom)
- (1) C-SA25-25 (Sprague Atom)
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $4.65

Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.
Starting at $12.95

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 25 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Red, Black)
$12.25

Package of 13
Replacement electrolytic capacitor set.Basic set includes:
- (3) C-ET22-500-FT
- (2) C-ET80-450-FT
- (1) C-ET50-50
- (7) C-ET25-25
- (3) C-SA20-500 (Sprague Atom)
- (2) C-SA80-450 (Sprague Atom)
- (1) C-SA50-50 (Sprague Atom)
- (7) C-SA25-25 (Sprague Atom)
Starting at $28.00

Package of 13
Replacement electrolytic capacitor set.Basic set includes:
- (5) C-ET16-475-FT
- (1) C-ET25-50
- (7) C-ET25-25
- (5) C-SA16-475 (Sprague Atom)
- (1) C-SA25-50 (Sprague Atom)
- (7) C-SA25-25 (Sprague Atom)
Starting at $31.75