Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Modeled after the legendary capacitors, the Jupiter Red Astron capacitors have a similar style to the vintage capacitors to give a very authentic tone and look, yet with high reliability and longevity. This phenolic case potted tin foil and mylar capacitor yields a uniquely vintage tone perfect for guitar amplifiers and vintage audio amplifiers alike.
- Construction: Polyester/Tin Foil
- Case: Potted Phenolic Paper
- Tolerance: +/-10%
- Operating temperature: -55C – 85C, derate 50% at 125C.
- Leads: 20AWG Tinned Copper
- Application: Guitar Amplifier, Guitar Tone Control, Vintage Audio Amplifier
- Made in the USA of US-made materials.
Starting at $12.95

Made of the highest quality aluminum metalized polypropylene film available.Made in France.
Starting at $4.75

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 50/50/50/50 μF 350VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 3/8"D X 2 1/2"H.
$40.90

Illinois Capacitor 450 V axial lead electrolytic. Rated for 85 degree operation.
Starting at $5.80

Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.
- Voltage: 400VDC
- Dielectric: Paper in Mineral Oil
- Tolerance: +/- 10% Operating
- Temperature: 85°C
- Leads: 20awg Tinned OFC Copper
- RoHS Compliant
- Made in USA
$26.99

High quality axial-leaded electrolytic capacitors. These 041, 042, 043 ASH series capacitors are produced by Vishay BC, formerly known as Philips / BC. These capacitors have been produced for many years and can be found in a wide variety of music equipment including vintage amps by Vox, Hiwatt and Marshall. Features
Applications
- Useful life: 5000 h to 15 000 h at 85 °C
- High rated voltage: up to 450 V
- Polarized aluminum electrolytic capacitors, non-solid electrolyte
- Axial leads, cylindrical aluminum case, insulated with a blue sleeve
Applications
- General purpose, industrial, power supply, audio-video
- Smoothing, filtering, buffering at high voltages
- Boards with restricted mounting height, vibration, and shock resistant
Starting at $3.79

CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.90

The new SoZo fully custom silver mica capacitor is a distinct-design capacitor which is manufactured to fully exhibit the electrical characteristics of yesteryear and has custom materials. The overall goal was to manipulate the electrical characteristics to eliminate excess energy and ringing in the out-of-band audio frequencies.
Starting at $9.45

Flat 0.01uF (10nF) film capacitor rated for 250V. Made of metallized polypropylene film, this capacitor is a great choice for audio applications. The style of this yellow capacitor is similar in appearance to the flat rectangular Philips 341 output caps found in original Fuzz Face pedals.
$1.35

Dual section axial lead electrolytic capacitor from F&T with two 33uF sections rated for 450V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$10.95

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 40uF@450V, 40uF@400V, 30uF@350V.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 3/8"D X 2 1/2"H.
$40.90

Capacitor - Electrolytic, 30/30/30/10 µF @ 475 VDC Drop-In replacement for Leslie 4 section 30uF/30uF/30uF/10uF @ 475V
For use in Leslie 122, 147, many others.
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
For use in Leslie 122, 147, many others.
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/30/30/10 μF 475VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 65°C Temperature Rating.
- 1 3/8"D X 2 1/2"H.
$38.80

High quality low leakage axial lead electrolytic capacitor
- 70uF/100V
- Rated for 85° C operation
- Tolerance: -20%, +50%
- Measures 0.51" dia. x 0.84" length
$1.00

High quality radial capacitors rated at 250V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features
Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
- Polyester film dielectric
- Vacuum deposited aluminum electrodes
- Wound mono construction
- Flame retardant epoxy material (UL-class 94 V-0)
- Tinned wire radial leads
- Performance Grade 1 (long life)
- ±10% tolerance
- Rated 250VDC
Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
Starting at $0.75

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
- 40/20/20/20uF 525VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 2 1/2"H.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90

High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$0.90
package of 5

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95

Dual section electorlyic capacitor from F&T with two 8uF sections rated for 450V. This type of cap is used in Vox AC30 amps. The capacitor body has a 1" diameter and 1.5" length. Made in Germany.
$8.25

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 40/20/20uF 500VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 2 1/2"H.
$38.80

Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.60

Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.
$40.90

Phenolic insulator for mounting FP type can capacitors.
$1.50

Dual section axial lead electrolytic capacitor from F&T with two 25uF sections rated for 25V. This type of cap is used in Fender amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$9.95

CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 3 1/2"H.
$40.90