Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-EC50X4-350 Capacitor - CE Mfg., 350V, 50/50/50/50 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 50/50/50/50 μF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$40.90
C-ET100-450-FT Capacitor - F&T, 450V, 100µF, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor
  • 100uF/450V
  • .98" diameter x 1.96" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$8.95
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$11.50
C-D-3000V Capacitor - 3000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 3kV, ± 10% tolerance.
Starting at $0.40
C-EC20X3-525 Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.80
C-V100P Capacitor - 100pF, Variable, Single Section
This capacitor is used as a tuning capacitor in a variety of RF test equipment and ham radio gear. It's combination of low price, high maximum voltages, fairly large capacitances, and low-leakage L-4 grade ceramic have made it a popular configuration. Single section 100pf, screwdriver or knob adjustable, full rotation.
$18.95
C-EC32-32-500CE Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.
$7.50
C-EC30-20X3-525 Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.90
C-EC40X4-350 Capacitor - CE Mfg., 350V, 40/40/40/40 μF
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 40/40/40/40 uF @ 350 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 85°C Temperature Rating. 1-3/8" dia. x 2-½" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
C-ET10-350-IL Capacitor - Illinois, 350V, 10µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Size.50" dia. x 1.04" length. Formerly C-ET10-350
$1.65
C-D-6000V Capacitor - 6000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.55
S-H120M Mounting Plate - Metal, for 1.375" Can Capacitor
Metal plate for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$1.95
C-EM33-33-450 Capacitor - F&T, 450V, ~\frac{33}{33}~ µF, Electrolytic
Made in Germany. 1" diameter x 2" length. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$9.95
C-ET-450 Capacitor - 450V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. 
Starting at $1.10
C-ZYD68-200 Capacitor - SoZo, 200V, .68 µF, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
$8.95
C-ET100-350-IL Capacitor - Illinois, 350V, 100µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance -20%, +50%.
.72" diameter x 1.54" height
$3.95
C-EC32-32-500 Capacitor - JJ Electronics, 500V, ~\frac{32}{32}~ μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.45
C-ER47-80-160 Capacitor - CE Mfg., 160V, 47/80µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/80 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Orange, Black):
  • Red to Black = 47 µF
  • Orange to Black = 80 µF
$8.95
C-EC30-30-30-10 Capacitor - CE Mfg., 475V, 30/30/30/10µF, Electrolytic
Capacitor - Electrolytic, 30/30/30/10 µF @ 475 VDC Drop-In replacement for Leslie 4 section 30uF/30uF/30uF/10uF @ 475V For use in Leslie 122, 147, many others. CE Manufacturing capacitors are hand made in the USA using original Mallory Equipment. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$38.80
C-ER47-47-160 Capacitor - CE Mfg., 160V, 47/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):
  • Red to Black = 47 µF
$8.95
C-EC50-50-500CE Capacitor - 500V, ~\frac{50}{50}~ μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.
$8.25
C-EM25-25-25 Capacitor - F&T, 25V, 25/25µF, Electrolytic
Made in Germany. 1" diameter x 2" length. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$9.95
C-EC4030X2-450 Capacitor - CE Mfg., 450V, 40/40/30/30µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/30/30 uF 450VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H
$40.90
C-ET47-250 Capacitor - 250V, 47µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Size .63" dia. x 1.25" length.
$2.95
Don't see what you're looking for? Send us your product suggestions!