1. Home
  2. Products
  3. Capacitors

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.
products per page
C-EC40X2-450 Capacitor - CE Mfg., 450V, 40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 2 sections - 40/40µF at 450V
  • -10%, +50% tolerance
  • 85° temperature rating
  • 1-⅜" dia. x 2.6" tall
$40.95
C-EC60401025 Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
$36.95
C-EC30-20-475 Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.95
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$14.95
On Backorder
C-EC32-32-500CE Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$7.95
C-EC40-10-10-250 Capacitor - CE Mfg., 40µF@450V, 10µF@450V, 10µF@450V, 250@25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 40µF@450V, 10µF@450V, 10µF@450V, 250@25
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC10X4-450 Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$36.95
C-EC40-40-25-25 Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.95
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$18.45
C-EC40-20-20 Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
S-H126 Capacitor Clamp - Marshall Style, 1.375" Diameter, for Vertical Mounting
Circular clamp for mounting multi-section can capacitors directly to chassis. This style of clamp closely resembles the clamps used on vintage Marshall amplifiers dating back to the 1960s. This clamp is for use with 1 ⅜" (1.375") diameter capacitors. All hardware is sold separately.
$2.75
C-EC20X3-450 Capacitor - CE Mfg., 450V, 20/20/20µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. 3 sections 20µF at 450VDC. 85°C temp rating.
Great replacement for the can capacitor in the Champ AA764, Vibro-Champ AA764, and Bronco Amp AB764.
$37.95
C-EC100-100-500 Capacitor - CE Mfg., 500V, 100/100µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$40.95
C-EC40-20-20-10 Capacitor - CE Mfg., 475V, 40/20/20/10µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
  • 40/20/20/10uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
C-EM33-33-450 Capacitor - F&T, 450V, 33/33µF, Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 33uF sections rated for 450V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$10.95
C-EC40-20X3-525 Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
S-H121M Mounting Plate - Metal, for 1" Can Capacitor
Metal plate for mounting FP type can capacitors. Designed for use with three section, 1” capacitors.
$1.50
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
C-EC60-40-40-40 Capacitor - CE Mfg., 400 V, 60/40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/40/40/40uF 400VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3.6"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
S-H120 Insulator - 4 Section, for FP can capacitors
Phenolic insulator for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.95
C-EC4020X2-525 Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.95
C-EC70-40X2-450 Capacitor - CE Mfg., 450V, 70/40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 70/40/40µF 450VDC
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$40.95
C-EC20-10-10-10 Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 1/2"H.

*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$37.95
C-EC80-40-40 Capacitor - CE Mfg., 450V, 80/40/40µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/40/40uF - 450VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.95
Don't see what you're looking for? Send us your product suggestions!