1. Home
  2. Products
  3. Capacitors

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.
products per page
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.95
C-EC500-500 Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$21.95
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$18.95
C-EC32-32-500CE Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$7.95
C-EC250-500 Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.25
C-EC40X3-525 Capacitor - CE Mfg., 525 V, 40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC20X3-525 Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.95
C-EC40-20X3-525 Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC80-40-30-20 Capacitor - CE Mfg., 525V, 80/40/30/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 80/40/30/20uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-3/8" Dia. X 3-1/2" H.

Great replacement for the can capacitor in the Princeton 6G2.
$43.95
C-EC4020X2-525 Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.95
C-EC30-20X3-525 Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.95
C-EC30X3-525 Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.
$38.95
S-H128 Capacitor Clamp - 1.5" Diameter, for vertical mounting
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut. 1-½" diameter.
$2.65
S-H120 Insulator - 4 Section, for FP can capacitors
Phenolic insulator for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.95
S-H121 Insulator - 3 Section, for FP Cap, 1.5" Mounting Centers
Phenolic insulator for mounting FP type can capacitors.
$1.50
S-H123 Capacitor Clamp - 1" diameter, for vertical mounting
Clamp for mounting electrolytic can capacitors in vertical position. Supplied with #6-32 screw and nut.
$2.70
S-H120M Mounting Plate - Metal, for 1.375" Can Capacitor
Metal plate for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.69
C-EC40-40-25-25 Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.95
C-EC100X3-200 Capacitor - CE Mfg., 200V, 100/100/100µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
C-EC120-20-300 Capacitor - CE Mfg., 300V, 120/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 120µF@300V, 20µF@300V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC60-60-40 Capacitor - CE Mfg., 450V, 60/60/40 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 60µF@450V, 60µF@450V, 40µF@450V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC30X3-10-525 Capacitor - CE Mfg., 525V, 30/30/30/10uF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
S-H126 Capacitor Clamp - Marshall Style, 1.375" Diameter, for Vertical Mounting
Circular clamp for mounting multi-section can capacitors directly to chassis. This style of clamp closely resembles the clamps used on vintage Marshall amplifiers dating back to the 1960s. This clamp is for use with 1 ⅜" (1.375") diameter capacitors. All hardware is sold separately.
$2.75
Don't see what you're looking for? Send us your product suggestions!