Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Multi-Section / Can Type
Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.
JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$7.95
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$9.25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 50/50/50/50 μF 350VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 3/8"D X 2 1/2"H.
$40.95
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.95
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
- 100/100uF - 500VDC Electrolytic
- FP / Twist Lock Style. Solder Tabs
- -10%, +50% Tolerance, 55°C Temperature Rating
- 1 ⅜"D X 4"H
$40.95
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$8.95
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$9.95
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.25
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.95
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$21.95
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$14.95
1 3/8" diameter x 3 1/2" height. Similar to LCR
$18.45
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut. 1-½" diameter.
$2.65
Phenolic insulator for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.95
Phenolic insulator for mounting FP type can capacitors.
$1.50
Clamp for mounting electrolytic can capacitors in vertical position. Supplied with #6-32 screw and nut.
$2.70
Metal plate for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.69
Circular clamp for mounting multi-section can capacitors directly to chassis. This clamp is for use with 1 3/8" (1.375") diameter capacitors. Includes one clamp with tightening hardware. Mounting hardware is sold separately.
- Mounting hole center to center - 1.938"
- Mounting holes - .188" x .281"
$2.39
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.95
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
- 120µF@300V, 20µF@300V
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 ⅜"D X 3"H.
- All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
- 60µF@450V, 60µF@450V, 40µF@450V
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 ⅜"D X 3.6"H.
- All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95