1. Home
  2. Products
  3. Capacitors

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.
products per page
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
C-EC250-500 Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.25
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.95
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$14.95
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$18.45
C-EC200-80 Capacitor - CE Mfg., 200µF@200V, 80µF@350V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 200µF@200V, 80µF@350V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC1020X3-450 Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$36.95
C-EC40X2-450 Capacitor - CE Mfg., 450V, 40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 2 sections - 40/40µF at 450V
  • -10%, +50% tolerance
  • 85° temperature rating
  • 1-⅜" dia. x 2.6" tall
$40.95
C-EC150-80-80-50 Capacitor - CE Mfg., 250 V, 150/80/80/50 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 150/80/80/50 250VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE Manufacturing can capacitors have a two year warranty against manufacturer defects.
$36.95
C-EC30X2-20-525 Capacitor - CE Mfg., 525V, 30/30/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$38.95
C-EC100X3-20-200 Capacitor - CE Mfg., 200V, 100/100/100/20µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - 100/100/100/20µF at 200V
  • -10%, +50% tolerance
  • 85° temperature rating
  • 1-3/8" dia. x 3" tall
$38.95
C-EC30-10X2-450 Capacitor - CE Mfg., 450V, 30/10/10 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 30µF@450V, 10µF@450V, 10µF@450V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 2.6"H.
  • Filter capacitor used in Hallicrafters S-20R, S-40 series and the SX-99 radios.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC30X3-10-525 Capacitor - CE Mfg., 525V, 30/30/30/10uF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC50X2-400 Capacitor - CE Mfg., 400V, ~\frac{50}{50}~ µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 50µF@400V, 50µF@400V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95
C-EC40-10-10-250 Capacitor - CE Mfg., 40µF@450V, 10µF@450V, 10µF@450V, 250@25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 40µF@450V, 10µF@450V, 10µF@450V, 250@25
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC47X3-350 Capacitor - CE Mfg., 350V, 47/47/47μF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 47/47/47uF 350VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2.6"H.
$40.95
C-EC120-100-100-100 Capacitor - CE Mfg., 350 V, 120/100/100/100 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. Similar to Mallory FP417.26.
  • 120/100/100/100uF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜" D X 3.5" H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC40-40-25-25 Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.95
C-EC50X2-500 Capacitor - CE Mfg., 500V, ~\frac{50}{50}~ μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 50µF@500V, 50µF@500V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1”H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC60-30X2-450 Capacitor - CE Mfg., 450V, 60/30/30uF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/30/30uF 450VDC Electrolytic.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC60-60-30-30 Capacitor - CE Mfg., 350V, 60/60/30/30 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 60µF@350V, 60µF@350V, 30µF@350V, 30µF@350V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC40X4-450 Capacitor - CE Mfg., 450V, 40/40/40/40µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to Mallory specs using original Mallory machinery. 85°C temperature rating.
$38.95
C-EC80-40-40-50 Capacitor - CE Mfg., 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Don't see what you're looking for? Send us your product suggestions!